Jump to content

drucker

Member
  • Posts

    132
  • Joined

  • Last visited

Everything posted by drucker

  1. Sold my 2019 HC and it had a window leak at 35k miles and bought a 2022 refresh in October. It started leaking yesterday with 5300 miles.
  2. I have one that was built 6/16 and has been sitting at event code 3800 since then. My dealer said might get it by mid September.
  3. I had the same problem with my aluminum boat trailer. I tried everything but nothing worked all the time. I ran a ground wire down each side of the trailer from the plug (white wire) to each tail light. I removed all ground wires that were screwed or bolted to the trailer. I have a flat bed metal framed trailer and a galvanized boat trailer and I didn't have to run a ground wire to each light. All trailers have LED lights but the aluminum had to be wired different.
  4. Did you ever get your rear media to work on Miracast? I went through several Miracast apps before I got it to work.
  5. I'm waiting on my wife's Tahoe that I ordered in January. It was shipped on March 8th and still on a train according to Chevrolet. I didn't know it would take 3 weeks to get from Texas to Jacksonville, FL. The estimated delivery date to dealer was yesterday (3/25/21). I talked to the dealer and he said ETA still shows yesterday. Update: Now GM is saying 4/8/21 on the Tahoe. I am waiting on a AT4 to come in with 3.0 diesel, thought about trading in my HC with 6.2 for it. It should be in 4/12/21 according to GM. I'll make that decision when it comes in and I can put my hands on it.
  6. In my 2014 and 2019 I use them twice a day everyday.
  7. Thanks. Looks like I'll stick with LTZ or HC. Don't wanna have to widen my garage.
  8. Can you get power folding side mirrors on a LT or RST model? I need the folding mirrors to be able to get in my garage.
  9. Does anyone know February incentives?
  10. I have taken this trip several times and I have never gotten over 21 mpg either direction with with 93. Most of the time it will be around 19.5-20.5 mpg. I usually go to the lake about once or twice a month. This is the first time I have used non-ethanol.
  11. I have always ran 93 in mine. I have 38xxx miles with lifetime 18.1 mpg. I have never cleared my trip A just so I can compare it with my 2014 5.3 which had 14 mpg.
  12. My service engine light came on last Thursday afternoon so I figured I would try and experiment and it worked this time. I went to the lake and this town doesn't have high octane gas because most stations have non-ethanol in the place on 93 octane. After running non-ethanol for about 50 miles my service engine light cut off. Last Friday I cleared my trip calculator and went out of town (168 miles) and got 20.8 mpg on 93 octane. I waited until my low fuel light came on and filled up with 90 octane non-ethanol. I cleared my trip calculator again drove the same route (168 miles) home and got 22.6 mpg.
  13. Has anyone went from a K2 5.3 to the 2.8 diesel? Whats the towing difference? I have a 6.2 now but thinking about the 2.8 diesel. The only thing I tow is a John Deere Gator (XUV) and a 20ft center console aluminum boat. I drive about 60 miles a day to work and back.
  14. I added the 1 inch block from fabtech's 3 inch lift.
  15. What about any other 2019 4x4? Does yours have rear blocks from factory?
  16. Can someone else with a 2019 check to see if the have factory blocks?
  17. My trucks have always been a little nose high because of tools, dog box, coolers, etc. but this ones is a little more than I want. Daystar and Zone does not have any lift blocks on their website for 2019. I emailed them and waiting to hear back.
  18. The dealer put my leveling kit on before I picked it up. I have looked for a brand name but can't find one. I measured from my carport floor to the rear fender (38 1/8 inches) and from the carport floor to the front fender (40 inches). Fabtech is sending their block and U bolts for their 3.5 inch lift. Hopefully this should lift me back up in the rear. I do not see a block from factory. Here is a picture of leaf springs and the sag in the truck.
  19. I put a leveling kit on my HC and it was about 1/2 inch high in the front. Yesterday I put my toolbox and all the crap that stays in the back and now I'm almost 2 inches high in the front. Is there a 1.5 inch block/lift that I can add in the rear to get me back close to level? I just emailed Fabtech to see about just the 1 inch block and U bolts that is in their 3.5 in kit. They emailed me back at $152 shipped.
  20. Mine was ordered 8/18, built 9/27, and delivered 10/18. It was loaded on the rail in Ft. Wayne on 10/1 and sat in the shipping yard in Lawrenceville, Ga. from 10/8 to 10/18. They put it on the delivery truck on 10/18 and about 6 hours later the dealership sent me the picture of it coming in. It was exactly 2 months from order date to delivery date. All that information came from Chevrolet.com chat.
  21. I'm glad I saw this. I thought my tailgate was already broke.
  22. It's like the night before Christmas for me. I will look over it with a fine tooth comb before driving out with it. Hopefully they will have it leveled when I get there. I'll post some more pictures tomorrow.
  23. It's 3 hours from me and about 2 hours from the dealer. I just asked the salesman and he said the sale manager has called everyday since it was built and now the higher up has called and hopefully they will put a rush on it. Sounds to me they need more delivery guys.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,998
    Total Members
    8,960
    Most Online
    overspeed
    Newest Member
    overspeed
    Joined
  • Who's Online   2 Members, 0 Anonymous, 304 Guests (See full list)

×
×
  • Create New...