Jump to content

Goobax

Member
  • Content Count

    115
  • Joined

  • Last visited

Everything posted by Goobax

  1. No sound clip but I have had the AFE since they were release. It doesn't make a huge difference in turbo spooling, if that's what you're after. but you do hear the intake itself at low RPMs (1500 - 2500 specifically).
  2. I used a LOT of second skin when I did my speaker installs. Made a huge difference IMO. Debated on doing the floor boards but will probably save that until I get a sub
  3. Update, looks like my impact (Ryobi) doesn't have enough ass to it. Guess it's off to the dealer I go to have them install. Tried heat gun, breaker bar, etc. Couldn't get it to budge and worried about stripping it out or worse.
  4. https://www.whiteautoandmedia.com/product/t1-pickup-wams-spec-bcm-programming/
  5. Just a heads up for anyone doing this down the road. GM parts store changed the part# of the steering wheel to 84813359. This has the atmosphere trim cover already and comes with all the buttons (paddles, cluster menu) included for same price. Good thing I bought the trim cover listed as well because I hate the atmosphere color. if anyone needs an extra atmosphere trim cover just lmk and can sell for cheap
  6. cannot be done either way. WAMS does have a new module they are working on but have not explicitly stated it will work on customs to add full functionality of the steering wheel controls on the Custom trims.
  7. Just a few tabs on the back to remove, nothing major.
  8. That's definitely the whole headlight. You do need the harness as well though which you can get from gen5DIY
  9. You’ll need to take into account that the Custom trucks do not have the steering wheel controls to access and scroll through the cluster menus. So far, no one seems to have been able to address this part in particular which would make this “upgrade” a waste of time for you for the most part
  10. Yes, I have the same and works.
  11. Looks really good, need to do this soon myself. What size is the center bolt to remove the wheel itself?
  12. Yes, send me a message if you're interested. As far as I have seen, most component sets recommend against doing this don't they? I opted to install my tweeters in the dooes then I went with 3.5in JL Audios after having the small memphis direct replacements. Sounds way better now.
  13. Requires a lot more than just swapping the infotainment center. Short answer, has not been done and more importantly the general consensus is it CANNOT be done.
  14. Had the dealer paint to match when they did my grill, mirror caps, and door handles Driver side is easy, just need to trim a little of the inner piece from a Custom trim as these do not have the chrome rings around the vents. The passenger side requires removing the whole middle pad, lower center prices and radio though. Honestly I would just wrap it if you want it blacked out and save the trouble. In pets you’re probably looking at 60 bucks though and like I said relatively minor trimming to fit.
  15. Definitely need to do this, just sucks not able to actually use the controls.
  16. Potato pics of the finished work. Should have come from the factory this way but then again, I should have just bought a higher trim as well lol. Finished the upper dash and door card "conversion" on my Custom.
  17. I made a mess.... Changing out the plastic pieces on the top dash (top pad, glove box, both vent panels) for the leather counterparts.....Why did I think this would be a good idea? Also swapping out the factory dash speakers for Memphis upgrades while I am in there.
  18. If anyone looking to do this, I have the following parts I'm not using: L Switch Harness 84449518 L Switch 84699726 R Switch Harness 84449516 R Switch 84559726
  19. Just get it paint matched if you want some color. I have the chrome bezels for the driver and passenger side vents if you're interested. I upgraded my plastic pieces to the leather wrapped ones and didn't want the chrome so I kept my stock black ones.
  20. the daytime running LEDs are different and the turn signal are LEDs on the high country
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.