Jump to content

'06 5.3, Cam Swap Info Needed

twister88

Recommended Posts

twister88 New Member

twister88

Posted
Posted

I have a 06 GMC with a 5.3 and a cam noise...I will be making the swap and am wondering what cam/lifter package would best fit my needs.

 

I tow a 28ft enclosed trailer with it and am looking to upgrade in this direction, more bottom end for towing, and also want to use this oppurtunity to install a power chip, cold air kit, and an exhaust upgrade. It has been many years sinse I have done engine work like this, so I am also looking for things to watch out for, little tricks etc. from folks that have already done this.

 

I also am clueless about tuning after the upgrades and would appreciate any info about that, or pointed in the right direction.

 

Thankx for any and all information, I know that this is alot of info, but i am trying to do this once and right.

 

Dave

Jennabear Senior Enthusiast

Jennabear

Posted
Posted

Honestly, your best bet is to call a cam company and let them know what you expect out of a cam, and have them suggest a grind. Folks can make suggestions, but they may not be formidable for your application.

 

EX- I have a 206/212 115LSA, but my Tahoe is a DD, I wanted power across the band, didn't want to install a torque converter, and knew I would be installing a blower down the road.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • 2017Z
      2020 Trailboss 6.2 replacement

      By 2017Z · Posted

      Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • GN2018
      AFM Disabler Question

      By GN2018 · Posted

      Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • davester
      Wiring Help, Please

      By davester · Posted

      you might read through the info on gmupfitter.com for your truck, to find a good power source.
    • Grumpy Bear
      AFM Disabler Question

      By Grumpy Bear · Posted

      Melling I believe is/was the OEM on the lifters who explored this problem some years ago. The white paper they generated on the topic indicated two items of note when I read it. 1.) They only fail on the switch. Prevent the switch, prevent the failure. 2.) The majority fail due to deposits messing up the timing of that switch. Anyway that's what I got from it.    Mine have always been active, 195K+ now, and my oil maintenance is surgically clean.    Of course this assumes good parts. That is no heat treat issue or machining flaws. I get comfortable that these issues are in the rearview mirror by about 30K. IMHO naturally. 
    • Chuck FB
      2 speed transfer case optional now?

      By Chuck FB · Posted

      Yes, the key seems to be with the half tons that if it has the Z71, then it definitely has the two speed. What got me was that the two speed AND the lower geared towing package option could not be chosen together the last few years unless it was mated up to the 6.2. Want the 3.0 duramax and 3.73 tow gears ... nope, can't get the two speed transfer case ( neighbor son realized that after he had bought his used 3.0 half ton .. where the frick is the low range ? ! ).    I am still unsure which truck series, the half ton or the HD truck that the original poster is referring to for sure other than yes his question is in the HD section of this forum but that doesn't guarantee the question got asked in the right section.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...