Aftermarket 18" wheels on AT 4 with RC 2" level

[rodanst6]

First off, thanks to all for the great information on tire sizes on the AT4, I went with the 295 70 18 Ridge Grappler on the stock 18 inch wheels with no rubbing.  I have decided to move to an aftermarket wheel and am looking to push the wheel/tire out from the truck about 1/2-1 inch.  I have read alot of information about different combinations of 20 inch  aftermarket wheels and tires but nothing much on 18 inch wheels.

 

Can anyone offer advice on a 18 inch wheel that will work?  I am looking for a slightly wider stance than stock (stock wheel has 26mm of offset) so I am thinking 12 or 13 offset should work and 0 offset might work.  Has anyone put aftermarket 18" wheels that can offer some advice.

 

Thanks in advance.