Jump to content

Instrument Cluster Part #?

Ricky_Starbucks
 Share

Recommended Posts

Ricky_Starbucks Enthusiast

Ricky_Starbucks

Posted
Posted (edited)

Im looking for the instrument cluster part number for a High Country that does not have Auto Stop.  When I had a seller look up a VIN (3GCUYHEL5MG470828) of a truck that doesn't have it I am told the part number is 84655440.  However when I look up that part number, and the seller checks their stock, that part number has the Auto Stop on the RPM gauge.

 

Does anyone know the correct part number for this configuration?  Looking to put in my 21 LT Trail Boss.

Edited by Ricky_Starbucks
Dan Bradley Enthusiast

Dan Bradley

Posted
Posted (edited)

If you have a 6.2 I believe you want part number 84935278. There’s over 50 different cluster part numbers, I’m not sure where he found that part number but it doesn’t even come up with the vin number that you provided. Nonetheless you’ll want to contact your local gm dealer to order as they will need some info from you or possibly contact specmo enterprises out of Michigan and see if they will sell it to you. No guarantees that it will work and I’m sure they will tell you there will be no returns if it doesn’t work. 

Edited by Dan Bradley
Ricky_Starbucks Enthusiast

Ricky_Starbucks

Posted
  • Author
Posted
3 hours ago, Dan Bradley said:

If you have a 6.2 I believe you want part number 84935278. There’s over 50 different cluster part numbers, I’m not sure where he found that part number but it doesn’t even come up with the vin number that you provided. Nonetheless you’ll want to contact your local gm dealer to order as they will need some info from you or possibly contact specmo enterprises out of Michigan and see if they will sell it to you. No guarantees that it will work and I’m sure they will tell you there will be no returns if it doesn’t work. 

Thank, the VIN I posted is just of a vehicle I found that has the cluster and no auto stop feature.  I was trying to see if I could procure the cluster and have WAMS do the programming for the swap to see if it came out cheaper than the whole kit directly from WAMS.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,972
    Total Members
    8,960
    Most Online
    Whit.the.COB
    Newest Member
    Whit.the.COB
    Joined

  • Who's Online   1 Member, 0 Anonymous, 1,140 Guests (See full list)

  • Latest Articles

  • Posts

    • MikeBMW
      Installing tow mirrors

      By MikeBMW · Posted

      Yep! This should be a pin somewhere as @pgamboa really dives into all of this. Thanks for reposting the link!
    • Grumpy Bear
      TCM Tuning 6L80E

      By Grumpy Bear · Posted

      I did the new thermostat after doing a 'flip' for a year. Runs as cool one way as the other in the summer but in the winter there is a bit of a floor. Yellow with the new 70 C thermostat. My data over the life of the unit to date. Still need more cooler. Anyway that floor helped both winter fuel economy and shift quality in the winter. I found it a good balance.       
    • Grumpy Bear
      Food & Drink

      By Grumpy Bear · Posted

      Evan Williams Bottled in Bond   So pouring the last of a bottle of Evan Williams Black label last night I set off the the state store for a refill only to be denied the by an empty shelf. Rats.    What the did have was a bottle of Evan Williams Bottled in Bond. 100 proof. Hum, a few bucks more but a known distiller. Lets have a swing at it. ( I have before )    Cracked it open and pour a serving over ice. Hum.... more heat, yes. More alcohol naturally. But the barreling not the proof brings the taste and this one came up short.    Oh is was familiar but the heat ran the barrel over like a Peterbilt runs over a squirrel. Could use a heavier toasting of the oak me thinks or perhaps a longer barreling. Who knows. But what I can say is ice or a water back isn't the answer. What kills one kills them both. Sad. It is a pleasant drink....if you have little to compare it to.  
    • Grumpy Bear
      Bridgestone vs Goodyear tires?

      By Grumpy Bear · Posted

      I've had exactly one set of Bridgestone. Lasted five year and 125,000 miles and had I known better 15oK would have been a cake walk. I would have bought a like set had they not tripled in price since the first set. I removed them at said mileage with 5/32" remaining in dead even wear all four. They were fuel efficient, quite, comfortable and predictable.    Early on I got a very good alignment checked at least once a year, sometimes twice; kept the tires properly inflated, balanced and rotated. And I've found that many a tire issue can be avoided with great maintenance practices. Lot's of tire dealers will do rotation and balance (simple) for free for as long as you own the tire they sold you so no excuse not to.    Bead prep, alloy integrity and stem health have a huge impact on inflation stability. There are more mountings done poorly that perfectly. Finding a good tire guy is gold and as important as finding a tire you like.    That 3X price increase now two sets of "other tires' later is starting look like a bargain.      Bad maintenance kills more tires than bad tires. 
    • Grumpy Bear
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Grumpy Bear · Posted

      Atlas, you kill me As aggravating as a project like this can be you have been unable to hide your fascination with learning and using that angst against this beast like a Ninjitsu Master. It amuses you, admit it now.      BTW, love your writing style. 😉       

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...