Jump to content

Recommended Posts

Posted

hello and thanks for accepting me to this forum. My reason for signing up here is to offer a truck my father has laying around on his yard that he purchased just for a few exterior parts that he needed for his GMC truck and he told me to post the rest in the appropriate place; so im only trying to help my dad out. I am also not too familiar with the forum layout/rules so my apologize in advance; i also know that this posting isnt in the correct section but i can't post in the for sale section yet; maybe because im a new member or there is a 10 post rule before listing in the for sale section I don't know.

 

I believe i have a 2002/2004 Chevy Silverado 4x4 truck, it has a "Z" and a # at the end of it (i can't remember).  I dont have pictures of the truck saved on my pc and its nighttime 11:30pm est  as i post this but will upload them in a few days. 

 

Truck's body is in rough shape but does have a good V8 engine + transmission. Truck does start and run but will have to be towed to new home.

Truck still has lots of good parts (ECM, dash console, differential, driveshaft) and thought i would offer this on here in case someone is looking for an engine, transmission, ECU/ECM (computer system), wiring harness,ect.

 

I thought it would be useful for parts. most of the "pick-a-part" junk yard where i live are non-existing in NY and only crush them completely. 

 

Truck will be sold as is as a parts truck. Battery will not be included in sale and customer must bring your own battery. I believe my dad has the title but will ask him tomorrow.

 

I forgot how much he wanted but its going to be very cheap and will be holding the truck for a few more week to see if we find a buyer but we really need the space  so this truck must go

 

truck is located on Staten island ny

Posted

try adding it to the selling websites maybe you'll have more luck there, also facebook marketplace can also work 

Posted
11 hours ago, tioran said:

try adding it to the selling websites maybe you'll have more luck there, also facebook marketplace can also work 

I wanted to post in the for sale section but i have to post 50 times and as much as i like to i dont know how can i contribute without sounding spamy but i understand rules are rules. let me see if i can tried to post 50 times

 

Facebook i tried with another car and i got spammed with messages like "is it available?" and "can i drove it cross-county" and other nonsense 

 

as for the truck its mostly for the engine/trans/drive/differental/ front calipers combo with a few interior pieces and fiberglass back piece that may help someone. we could have taken it apart and have the engine on a dolly but we dont have the space and i wont be able to start the engine on the dolly compare to on the truck to show that it does run and to hear it. 

 

Truck has no title - so its basically a parts truck Z-71

1.JPEG

2.JPEG

4.JPEG

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,127 Guests (See full list)

  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...