Jump to content

O2 Sensor


Recommended Posts

Posted

Recently my truck a 1990 c2500 cel came on ok no prob read code bad o2 sensor changed it still throwing code hmm followed wirig and apparently the 2 wires coming from the o2 sensor have pulled out if anyone could tell me where these are supposed to go would be much apreciated ?

Posted
Recently my truck a 1990 c2500 cel came on ok no prob read code bad o2 sensor changed it still throwing code hmm followed wirig and apparently the 2 wires coming from the o2 sensor have pulled out if anyone could tell me where these are supposed to go would be much apreciated ?

 

 

Which 02 sensor? Normally there will be a plug within 6 to 10 inches from the sensor.

Posted
Recently my truck a 1990 c2500 cel came on ok no prob read code bad o2 sensor changed it still throwing code hmm followed wirig and apparently the 2 wires coming from the o2 sensor have pulled out if anyone could tell me where these are supposed to go would be much apreciated ?

 

 

Which 02 sensor? Normally there will be a plug within 6 to 10 inches from the sensor.

 

 

The plug on the o2 sensor is there but theres about 3 ft of wire coming from that iv done a sweep of the area but nothing obvious would it go direct to the ecm or?

Posted
Recently my truck a 1990 c2500 cel came on ok no prob read code bad o2 sensor changed it still throwing code hmm followed wirig and apparently the 2 wires coming from the o2 sensor have pulled out if anyone could tell me where these are supposed to go would be much apreciated ?

 

 

Which 02 sensor? Normally there will be a plug within 6 to 10 inches from the sensor.

 

 

The plug on the o2 sensor is there but theres about 3 ft of wire coming from that iv done a sweep of the area but nothing obvious would it go direct to the ecm or?

 

 

ya and this is the only o2 sensor on the truck its just ahead of the catalytic converter

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...