GTPprix

Thanks for the kind words Greg!!! Yes we are still doing the programming, if you are trying to contact us here you wont get a reply PM's are disabled due to the influx of people who ignored the please contact us from our website memos We aren't hard to find (white auto and media), if you contact us there during business hours we'll get you taken care of! Clusters must be correct for the model year you are trying to retrofit IE if you have a 2016 we need to start with a 2016 cluster and so on. Price also depends on if you decide to add any more custom applications IE HUD and/or if the unit is used.

I have done this exact programming for a couple of dealers, its likely one of those unless they went the aftermarket cobble your wiring route.

Controller, sensors, mode doors etc.

No. This stuff is all on a data bus now its not simply removing the parking break wire and grounding it like it used to ;) MVI can set you up with a reprogrammed factory module to allow this AND add more formats as well such as DIVX etc.

I seriously think my brain fried, I Thought I was on the Tahoe board LOL No the Headlamp modules work differently in the pickups vs the way the BCM was directly driving DRL's in other vehicles. Not an issue on these; man I derped out hard LOL

If you are applying full voltage to those you are going to kill them pretty quickly. They are PWM for both modes, testing showed HUGE loss in service life at full power.

It's only not permanent if you let it be, we do this for people all over the world as it's the only option.

Like where I already posted I can program them off lol

LOL!!!!

I'm sure it had nothing to do with it was only Saturday and I still have a littttttle bit of a life? LOL Yes it can be done, you may have to add hardware IE steering wheel controls. Also would need to add an HMI if you don't have one to get some of the screens IE infotainment integration.

A tech can't do it but my company can through custom bcm programming.

Lol!!!

Ok lets try this again.. CONTACT *ME* not the other way around.

So I say contact ME and people do the opposite? LOL

Contact me.

My company, same one that developed this:

damnt taptalk ate it Let me re upload it! Let's try this!

FYI the programming to do this through the BCM the OEM way is now a reality ;)

FYI I can program those out of the BCM.