2 Complete Seat Heater Kits For Both Front Seats And Ipod 2 Car Adapte

ColeTrains03 · February 16, 2010

For both front seats. i got them for my truck and then just never installed them. Will upload pics later It's got 2 pads for each seat, heavy duty wiring harnesses and dual side rocker switches that light up. green for lower heat and red for high heat and the middle setting for off. Higher end kit. The pad's can be cut to shape and will still work as should. Ebay kits go for around $100 shipped for each seat. I'll let mine go for $150 shipped for both sides

Pics in this Post along with Specs that were asked for . Specs are 12Volts/4.7Amp/60W. That's the minimum requirements for the system to work properly. On the high setting the seat warmers get between 103-108 degrees (+/-5*) and on the low setting it's 97-101(+/-5*) It also comes with things to attach the warmers to the seats themselves and also detailed general instructions. The brand is InnovativeHeat brand by Heitzgerat Setzi company. The harness is super clean looking and seems very durable. The elements are carbon fiber according to the box. Each of the seats is individually fused so you can trouble shoot an issue easier also.

Are ok to use on cloth seats and also in between the original seats and some slip over covers if need be.

Also have a Ipod to car adapter for the '03+ Silverado trucks. Also have a couple other harnesses but not sure what other years that it would cover. Can control the song changing from the radio but it only changes tracks. Does not allow for the song name and stuff to show up on the radio. Works great if you want to keep the stock radio and use an ipod thru it. Was over $100+ shipping. Asking $65 shipped. Don't have any pics of it but it's a Peripheral brand. Can get pics if needed

P.S. i have the seat heaters on a local forum and lots of interest and at least 2 in line for them and if for some reason it falls thru anybody on here that calls dibs can have them.

Wingnut · February 16, 2010

Hmmm...Interesting...

The wiring should just be like what...3 wires? Hot, ground, and switched 12v so it shuts off with the truck?

If you'd have put these up a few months ago (before winter) I'd have snagged them up. But at this point it's a catch-22. Too cold to put them on and when it warms up enough to do the job I won't need 'em

ColeTrains03 · February 16, 2010

for sure. but at least you'd be ready for next winter

Wingnut · February 16, 2010

Slight possibility of me not having this truck next winter

ColeTrains03 · February 16, 2010

ah ok then that would make sense

icetraxx · February 17, 2010

What is the part number on these. There is a II and a III version.

Thanks,

Larry

ColeTrains03 · February 17, 2010

i can't seem to find a model/style number on the box or the pads. The instructions just say how to do them. Sorry that i can't find that for ya Do you know what the difference is between the II and III?

djc122984 · February 17, 2010

I have an 05 sierra denali with the bose system. Will your ipod connector work with my radio

ColeTrains03 · February 17, 2010

Yes it will. i have an '03 Z71 with Bose and it worked awesome ;) just plug the adapter harness into the changer plug in the back and run the Ipod cable to where you want it . It's pretty simple. i went with a double din navi/dvd unit because i got sick of having my portable Navigation in the windsheild. And actually the dipswitches should already be set to what you need them at. This means all you would have to do it is plug in the adapter to the back of the radio, then to the Peripheral box and then run the cable that goes to the Pod to where you want it(i drilled a big enough hole so the ipod is in the console)

djc122984 · February 18, 2010

Yes it will. i have an '03 Z71 with Bose and it worked awesome ;) just plug the adapter harness into the changer plug in the back and run the Ipod cable to where you want it . It's pretty simple. i went with a double din navi/dvd unit because i got sick of having my portable Navigation in the windsheild. And actually the dipswitches should already be set to what you need them at. This means all you would have to do it is plug in the adapter to the back of the radio, then to the Peripheral box and then run the cable that goes to the Pod to where you want it(i drilled a big enough hole so the ipod is in the console)

awesome. well I just checked my account and I need to wait until I get paid will about another week. If it is still avaible then I will take it.

ColeTrains03 · February 18, 2010

ok sounds good. I'm actually heading outta town this weekend for a week and i will bring it with me in case i'm not back in time to send it out quick. I will just send it from where i'm at

cdsmith285 · February 23, 2010

For both front seats. i got them for my truck and then just never installed them. Will upload pics later It's got 2 pads for each seat, heavy duty wiring harnesses and dual side rocker switches that light up. green for lower heat and red for high heat and the middle setting for off. Higher end kit. The pad's can be cut to shape and will still work as should. Ebay kits go for around $100 shipped for each seat. I'll let mine go for $150 shipped for both sides
Pics in this Post along with Specs that were asked for . Specs are 12Volts/4.7Amp/60W. That's the minimum requirements for the system to work properly. On the high setting the seat warmers get between 103-108 degrees (+/-5*) and on the low setting it's 97-101(+/-5*) It also comes with things to attach the warmers to the seats themselves and also detailed general instructions. The brand is InnovativeHeat brand by Heitzgerat Setzi company. The harness is super clean looking and seems very durable. The elements are carbon fiber according to the box. Each of the seats is individually fused so you can trouble shoot an issue easier also.

Are ok to use on cloth seats and also in between the original seats and some slip over covers if need be.

Also have a Ipod to car adapter for the '03+ Silverado trucks. Also have a couple other harnesses but not sure what other years that it would cover. Can control the song changing from the radio but it only changes tracks. Does not allow for the song name and stuff to show up on the radio. Works great if you want to keep the stock radio and use an ipod thru it. Was over $100+ shipping. Asking $65 shipped. Don't have any pics of it but it's a Peripheral brand. Can get pics if needed

P.S. i have the seat heaters on a local forum and lots of interest and at least 2 in line for them and if for some reason it falls thru anybody on here that calls dibs can have them.