Jump to content

Desperately Seeking Valid Engine And Casting Number


Recommended Posts

Posted

I need to get hold of a valid engine and casting number from a LR4 255hp LS1 engine. It doesn't matter if the car has been wrecked or anything as long as the numbers are valid.

 

The reason for this is that I'm building an AC Cobra replica that will be powered by a LS7 Corvette engine and the regulations here in Sweden says that you cannot have more than 20hp/100kg (220Lbs) in a custom built vehicle. As the Corvette engine has 505hp my Cobra would need to weigh in at around 5500Lbs, which is somewhat more than the expected 2200Lbs :crackup: The plan is to put the numbers from the 255hp engine on my LS7 and limit the power during the registration.

 

I can assure you that my intentions with this are nothing but serious and I'm not going to use the numbers in any other way. Please, if anybody have access to these numbers from a 255hp LS1 engine please send it to me either via PM here or to this email address:

 

[email protected]

 

/Thomas

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...