Jump to content

Ls-1 Fans And Delta Current Control Controller For Sale

ZOOMY

By ZOOMY
in Classifieds (Buy/Sell/Trade)

Recommended Posts

ZOOMY Enthusiast

ZOOMY

Posted
Posted

Hi guys, cleaning out the extra stuff in the garage. I have LS-1 fans and the Delta Current Control controller model FK-50P. This is a really good setup and if you talked to anyone that has used that controller it works well. I had this setup in my 04 Silvy but took it off due to an overworked 105A alternator. The fans and controller worked flawlessly when they were installed. This is the controller only not the harness or plug in sending unit. Those are still all secured in wiring looms in my truck that I didn't want to tear up. The controller is almost brand new as I only had all this installed for about a month. It has an adjustment you turn with a small screwdriver to fine tune the turn on/turn off time. PM if interested and let me know if you'd like pics emailed to you.

 

www.dccontrol.com

 

used LS-1 fans and DC Controller FK50P (barely used) together $185 local pickup in Chicago area, $210 shipped to you.

ZOOMY Enthusiast

ZOOMY

Posted
  • Author
Posted
Is there a specific group of vehicles those will work on or is it customizeable?

 

Well most guys use the LS-1 F body fans because they are a close fit to the smaller stock 1500 radiator and they work better than most of the after market fans. The controller could be used on any fan I would think provided the current is within specs.

merlin5577 Senior Enthusiast

merlin5577

Posted
Posted
Is there a specific group of vehicles those will work on or is it customizeable?

 

Well most guys use the LS-1 F body fans because they are a close fit to the smaller stock 1500 radiator and they work better than most of the after market fans. The controller could be used on any fan I would think provided the current is within specs.

 

 

Do you know if they would work on my Suburban?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,724
    Total Members
    8,960
    Most Online
    No1UKnow
    Newest Member
    No1UKnow
    Joined

  • Who's Online   6 Members, 0 Anonymous, 1,006 Guests (See full list)

  • Latest Articles

  • Posts

    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      Hello All!   My 2019 Colorado 3.6 LT, 4WD Crew Cab has approximately 77,500 miles and I recently began experiencing the well-known transmission shudder between about 30 and 65 mph. The problem had worsened to the point that I could no longer attribute it to road conditions - and I had decided to bring the truck to the dealer - when recently, I experienced a sudden loss of power while driving at maybe 40 MPH. Several warning lights flashed, the “Check Stabilitrack” message appeared, and the Check Engine, Stabilitrack, and Traction Control icons remained illuminated. The truck regained driving power, but it stayed in a low gear with unusually high RPMs for the speed. (limp mode?) Because I was only about two miles from home, driving slowly, I was able to make it back and run an OBD-II scan, which showed fault codes U0101, P0700, and U0100. My next trip in the truck was to drive it to the dealer the following day. That trip began normally, but after about a mile I experienced another loss of power, along with the same warning lights and the same “Check Stabilitrack” message. As before the truck remained driveable, but again operated at an abnormally high RPM-to-speed ratio and seemed stuck in a single gear. About a mile later, the dashboard lit up once more, this time displaying “Check 4WD.” Soon after that, I arrived at the dealer. I have verified that the truck still has its original factory transmission fluid, which means it has never received the corrective fluid exchange outlined in GM Technical Service Bulletin #18-NA-355.  That was Thursday of last week and I've heard nothing yet from the dealer.    According to Technical Service Bulletin #18-NA-355 and the build date of my truck, my truck should have the newer LV fluid. I've done a little research and read something about a problem with the wiring harness as well.   Anyone have an insights into this situation?  Thank you!!
    • GMCustomerService
      Damaged Left Rear Bumper & Left Rear Quarter Panel - Repair Questions

      By GMCustomerService · Posted

      Having bumper and other body damages can be very frustrating, especially as a result of a parking lot collision/bump. Our team wants to learn more about the damages to your truck so we can look into ways we might be able to help. When you get the chance, please fill out our support form with more details: https://s.gmc.com/support-request . A member of our team will follow up with you as soon as next available. We want to get you enjoying your truck to the fullest again. 
    • PhilB
      Gas Prices

      By PhilB · Posted

      Did you even read this article?   Even the title of the article says "U.S.-Iran Deal Doesn’t Mean a Swift Return of Oil and Gas Flows"   Remember, crude oil prices are based on FUTURE purchases by the oil companies.  Gas prices are based on FUTURE purchases by the station.  This article stated that many of the oil producing nations have to restart their processes to get the oil produced.  Then the oil has to be shipped to wherever.  And it doesn't get there overnight.  And most of that oil is not coming here. Check out this site:  https://afdc.energy.gov/data/10621   A graph will pop up to show where the US imports their oil from.  Notice that there isn't a lot of import from OPEC and Iraq.  Most of the US import comes from Canada. The US oil produces are selling their oil on the open market, which is why the US fuel costs went up.  So you're correct, the US oil companies are going to slow walk the price downward.
    • GMCustomerService
      Tranmission stays in Low

      By GMCustomerService · Posted

      Having codes and an engine light with no hints on what might be causing it is nothing short of frustrating. How long have these concerns been present? We want to know more so we can look into ways we might be able to help you. When you get the chance, please fill out our support form with additional details on your experience so far. A member of our team will follow up with you as soon as next available: https://s.gmc.com/support-request 
    • GMCustomerService
      Defective Brake Pad Wear Sensor?

      By GMCustomerService · Posted

      Knowing the life of your brakes is a highly important status to keep track of. If you suspect your brake sensors need attention, please fill out our support form with additional details on your experience. When did you last take it in for inspection? Our team will follow up with next steps as soon as next available. Please include your username and GM Trucks Forum in the form as well. Support Form: https://s.chevy.com/support-request 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...