Jump to content

Gm Service

canyon2005

Recommended Posts

canyon2005 New Member

canyon2005

Posted
Posted

I have been a gm/chevy customer for all my life, my family also. And its unbeleiveble how crappy the service is. I never had problems with my vehicles until I bought my 2005 GMC Canyon. I dished out so much money in this truck its not even funny, last may warranty was just over 1000km, and GM wouldn't cover all of the repairs, they told me I had to pay labour and they would pay the parts. Finally I gave in, now the exact same problem occured, and now they are telling me I have to pay all of the repairs!!. I dont think its right because they should of fixed the problem correctly the first time. There was a new bulletin that went out two months before they repaired it the first time. They should assessed the problem. Never buying another gm product again.

 

Does anyone know a complaint line for GM?

ottovanbismarckq80 Enthusiast

ottovanbismarckq80

Posted
Posted

its not just GM its basically american cars in general i am in love with them but truth must be said when they reach 4 years of age.. they start to fall apart! but nonetheless i cant see myself driving anything other then GMC

DofD Senior Enthusiast

DofD

Posted
Posted

In part it is the dealership and their policies. At my dealer I get really good service.

 

I will have to disagree about the quality of American vehicles. It is a very 80's perspective from when the quality truly wasn't there. I had my 97 Tahoe for 12 years and only had three significant problems in that time (fuel pump in 98, rear gears in 2002, and intake manifold in 2008). Then before that with my Silverado I only had the starter go.

DofD Senior Enthusiast

DofD

Posted
Posted

Hopefully so. :dunno:

 

There are lots of factors that can contribute to a part failing. But over the past few years GM quality and reliability reports are even with or exceed that of the quality and reliability of the import manufacturers.

ottovanbismarckq80 Enthusiast

ottovanbismarckq80

Posted
Posted

i hope wat ur saying is true... i respect the japanese cars but theres a limit.. i do not want them to make american cars obslete.. i feel that when american cars are made they are made with heart.. while jap cars are literly just mass produced no personality at alll!

Wingnut Senior Enthusiast

Wingnut

Posted
Posted
its not just GM its basically american cars in general i am in love with them but truth must be said when they reach 4 years of age.. they start to fall apart! but nonetheless i cant see myself driving anything other then GMC

 

Yeah uh...I've had several more than 10 years old and from 250,000 to 350,000 miles with no major issues.

 

So I beg to differ.

pennzoil29 Senior Enthusiast

pennzoil29

Posted
Posted
its not just GM its basically american cars in general i am in love with them but truth must be said when they reach 4 years of age.. they start to fall apart! but nonetheless i cant see myself driving anything other then GMC

 

Yeah uh...I've had several more than 10 years old and from 250,000 to 350,000 miles with no major issues.

 

So I beg to differ.

 

 

:dunno::sigh:

rvsahs Senior Enthusiast

rvsahs

Posted
Posted
its not just GM its basically american cars in general i am in love with them but truth must be said when they reach 4 years of age.. they start to fall apart! but nonetheless i cant see myself driving anything other then GMC

 

Yeah uh...I've had several more than 10 years old and from 250,000 to 350,000 miles with no major issues.

 

So I beg to differ.

 

 

:dunno::lol:

 

:sigh:

BuckFeverZ Senior Enthusiast

BuckFeverZ

Posted
Posted
My truck's almost 10 years old and hasn't fallen apart yet...

 

Close, but I caught it before it happened.

 

That must've been heavy when you caught it :dunno:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...