Leaderboard

Picked up this matching 2015 Harley Davidson Street 750 to go along with mine .

2014.. 1.5 zone body lift .2.5 summit performance front only leveling kit.33-12.50 atturo trail blade xt. Sit factory at 36 front and 39 rear ..after couple days of driving 41 1/4 front 41 1/2 back.

earning her monthly payment. Lol

Picked up a matching 2015 Harley Davidson Street 750 for it to hang out with lol.

It was finally warm enough for me to properly clean my truck!

I think Stevencox has a 35x12.5x18 on his 7" RCX Sent from my iPhone using Tapatalk

Clean for now Snow is melting we need a good rain to wash salt away Ryan

Yes

So that little silver thing...that's an Accord coupe?

Mike On the side of the OEM projector, there is a plug for the same function. Tap into those. Heres a link to a Mini projector retrofit in a Sierra. http://www.hidplanet.com/forums/showthread.php?62319-Retrofitted-2015-GMC-Sierra&highlight=sierra

Nothing major or appearance / performance related, but added a USB Hub that will allow me to charge and use more devices at once.... Because yes, the 4 available ports aren't enough. Nothing's ever enough (Tested and works)

Here is a picture of mine

I go to the March Meet and the Hot Rod Reunion in October. A friend of mine that is a member goes out with there as well. I tag along with him. We take his golf cart out there and cruise aroubd the swap meet If it was yours, it would have already been traded in

8K already damn Ryan

2" level, 275/70/18's… Soon to have 5100's set at 1/2" and a 3" block in the back, also looking into Possible Cognito UCA's…

Had about 8" n southern MD yesterday so happy how awesome these trucks r n the snow

Love Iridium Metallic

I had my truck at the dealership the other day for some warranty work and asked if there was some way to recalibrate mine. The service writer said he was pretty sure they could. When I went back to pick it up, he said they couldn't do it because GM can only recalibrate by entering in one of their "preselected factory spec'd sizes". They do not custom calibrate by height or circumference, only by plugging in an actual tire size...ex P275-55-20, into their calibration tool. I figure it was noted on my truck's service record, so now if I do it myself with the Hypertech Tool, I'm somewhat covered. If they say something about it later, I'll claim that I had to do it myself to have a legal speedometer and odometer.

Agreed! Very nice! That's the way to do it! Take the pic before you leave the car wash lol haha...Wow that's actually not bad...lucky to last 6 minutes here...

Got a little snow last night. My truck is as dirty as it has ever been. Come on nice weather, I have some washing I need to do!

Thanks, Yup those are the stock gray accented 20" rims with standard 275 stock size tire. Extremely happy with bfg's new ko tire and would recommend them to anyone looking for a new set.

Finally some pics of my ko2's

I took delivery 2 weeks ago: Denali HD diesel, summit white, cocoa/dune, sunroof, off road suspension, trailering mirrors. Last week, based on research on the forum here, I changed out the OEM boards to Amp steps, added an RC 2" leveling kit, changed the tires to Toyo 295/60R20 Open Country AT II's, and added black WeatherTech floor liners. I think I'm done for a while. Love the truck. Sorry for the mediocre pictures - the weather has been frigid. I will post better pictures soon - the forecast looks good.

Changed the oil, put air in the tires, refilled the washer fluid, drained the catch can, cleaned the windows, changed the blinker fluid, vacuumed the carpet, and changed the windshield wipers. Oh and replaced the oil filter. Probably should have greased something too.

Added Z71 emblem to my grill. Plasti dipped the Z.

Untitled by Eric_Chenel, on Flickr

I got my 285/65-18 32.83/11.93 Nitto Trails mounted on my 18x9 0 offset today! Haven't encountered any rub so far!

I didn't really think about a brown truck until I saw this one on the lot. I like it.

GM has some plans and is working with Apple and Google but it's almost a secret. Very little info and no assurance that what they do will work with 14 & 15's. After 14 months it's been a big disappointment to me. Nav is a joke, voice commands for phone function poor, slow response, etc. This system looked good in the showroom but falls way short in everyday use.

Not great pics, but you get the idea. 285/65r18. I'm very pleased at how quiet they are. I'm still trying to find the sweet spot for psi.

I also like the white lettering but find the ko's are not aggressive enough. So I run these Sent from my iPhone using Tapatalk

Just put a set on mine, ride stiffer but handle well, balanced well. Got a slight roar, but not bad at all.

Where did you pick up the 5" antenna at?

Picked this up on Wednesday SLT 6.2 max tow 4x4.500 mi. on her now.Will soon make a vid of buddys lined up with 014 denali 4x4 6.2 3.42,then do more as we adds mods

22 inch rims bed rails bed rug tonocover chrome lower half mirrors and more to come I don't know if you can see my pic says to large

Pretty content with my z71 right now. So far 2" rcx. Tint all around and 35% on front. some used 285/55/20 for the moment..gonna order me some new tires soon. Wasn't sure on how the power would be since I have 3.08 but it's just fine. Gonna get the 285/55/20 toyo at2. Done some debading...left all the silverados may pull them off. Also my High country bumpers craigslist find lol. Truck is dirty but tooks some quick cell phone pics next to my downed tree from the strom the other night.

New to the forum and new 14' Sierra All Terrain. So far only 20% tint, LED conversion for the fogs/reverse/ect and HID's on the way.

Milo's iPhone

Haven't posted a pic in a while. Got her all cleaned up today. Sent from my iPhone using Tapatalk

Some newer pictures One of many stops from OH to CA.

Think we should go to pm, 200?

It really makes no difference, it is the OCD in me that wants the connector, it is just a square housing to hold the spade connectors, of which you would have to get special spade connectors to use the GM connector as that part number only has one wire with one spade connector included. I just prefer the factory look is all.

Installed Airaid kit for 6.2L. For those considering the full kit (202-111), the install is straight forward. I suggest installing the filter to the box coupler prior to installing the coupler to the box - you cannot get the filter installed if you wait until the end. Noise has a nice throat when the throttle opens. Noise while cruising isn't noticeable. Cannot comment on whether the supposed +/- 10hp exists since the truck is 5 days old (not near break in) and we're dealing with 420hp to start ? I was reluctant as many are with the open box concept as I like the sealed tops better, however it seals nicely to the hood and the new hoods seal better to boot. Overall, it's a classic, easy and enjoyable mod - happy so far.

Fabtech 4" lift, 295/60/20 trail grapplers on 20" BMF REPR's and debadged, still debating on replacing the chrome window sill trim with black and maybe mirror caps too, I'm gonna leave the handles chrome. I'm also painting the fender plastic pieces to match.

Ha - sorry...will get first thing in the morning. Dropping it off for tint and will snap a couple when I do so. The tires make the truck for sure. I did take one but it doesn't do it justice More tomorrow... Sent from my iPad using Tapatalk