Jump to content

HK_Crew

Member
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by HK_Crew

  1. HK_Crew
    Hard to check the tire pressure when its face up...
  2. HK_Crew
    Looks so good you even changed the license plate
  3. HK_Crew
    https://www.iconvehicledynamics.com/accessory/16066/icon-accessories-20-up-gm-2500hd-3500-0-2-stage-1-suspension-system-tubular/ These tubular arms fit and they also make billet arms which will meet your criteria.
  4. HK_Crew
    I'm running a 305/70/17 Nitto Ridge Grappler. Had to trim a fair bit to get this tire to fit with a 0 offset wheel. That included getting a mudflap delete and trimming the plastic. Also deleted the crash bar behind the mudflap but I could probably put that back on. You may get lucky if you keep the stock wheel as it will be pushed in closer to the engine bay. I live in Southern California so I can't comment on how these tire perform in the rain or snow. They are quieter and ride better than the stock Wranglers. Noticed a slight decline in MPG but not bad.
  5. HK_Crew
    I'm not sure where you got your numbers, but Chevrolet's website says the 2.7 has: 310 hp [231 kW] @ 5600 rpm 348 lb-ft of torque [471 Nm] @ 1500 rpm And GMC's website says the 6.2 has: 420 hp [313 kW] @ 5600 rpm 460 lb-ft of torque [624 Nm] @ 4100 rpm That's a difference of 110 hp and 112 tq, both in the 6.2's favor. Regardless, I'd like to see what you thought of the 8 speed vs the 10 speed transmission. I've heard the 8 speed is garbage, but have no first hand experience.
  6. HK_Crew
    This sounds awesome. Really makes me want to ditch my bbq muffler. Do you have DFM still active? How does it sound when it drops cylinders?
  7. HK_Crew
    This doesn't meet the thread title criteria but here's mine. Method 317 in 17"x8.5" - 0 offset 305/70R17 Nitto Ridge Grappler Had to do a mudflap delete and some trimming.
  8. HK_Crew
    Factory 2" lift with minor trimming of mudflap delete
  9. HK_Crew
    They are Method Race Wheels MR312 https://www.methodracewheels.com/collections/auto-wheels/products/312-matte-black
  10. HK_Crew
    Method Race Wheels MR317 in 17x8.5 - 0 offset and 305/70/17 Nitto Ridge Grapplers
  11. HK_Crew
    If they are the same size that came on the truck from the factory, you should run whatever pressure is posted in the door jamb.
  12. HK_Crew
    The S&B is pending a CARB number. Not California legal quite yet. Only one I know of is the GM Performance intake.
  13. HK_Crew
    Mid- travel is usually UCA and coil overs. However Baja Kits makes a stock length LCA with an option for a swaybar connection. https://www.bajakits.com/i-31570261-19-silverado-sierra-1500-2wd-4wd-stock-width-lower-arm.html?ref=category:1459192
  14. HK_Crew
    He's talking about the front swaybar, not the rear.
  15. HK_Crew
    Running a sway bar on a long travel kit can be tricky. Causes all sorts of clearance issues. I'd probably re-think a long travel kit for your usage. I think a mid-travel kit would probably work out better for you. King/fox/icon coil overs with a new UCA and maybe even a stock length LCA would be a massive improvement over stock.
  16. HK_Crew
    This is a known issue for several months know. https://gmauthority.com/blog/2020/09/new-service-bulletin-addresses-valve-spring-issues-in-gm-v8-engines/
  17. HK_Crew
    Range doesn't have a DFM disabler (not including the Pulsar LT). Range has an AFM disabler. The Pulsar took maybe 15 minutes to install and set up.
  18. HK_Crew
    I have the Pulsar LT on my 6.2 AT4. I imagine you would have to adjust it to your preferences once its re-installed. But it probably took me all of 10 minutes to figure out how to adjust what I wanted and actually change it. It's not time consuming at all.
  19. HK_Crew
    Which style steps are these?
  20. HK_Crew
    I've popped off the black covers in the tailgate to snoop around and most of the area has 2 layers of sheet metal so you may be SOL
  21. HK_Crew
    This one: https://www.gen5diy.com/collections/14-18-silverado-p-p-harnesses/products/14-18-silverado-drl-harness
  22. HK_Crew
    Yea I got them in like a week ago or so. Been holding off on the install.
  23. HK_Crew
    FastWS6TA, I just purchased the FX-R retro kit from your site. Do you recommend the DRL delete kit, or am I good to go with the stock DRL? Anything else you recommend for install? It's a 2015 Silverado.
×
×
  • Create New...