Robo9831

Would like to share some pictures of where I ended up putting my aux switches at. I have one before picture. The rest is after. I didn’t like the idea of the switches being low on the knee panel. so I will be rewiring and hardwiring the full kit in. Cause this kit is really made for 2019 and up. My truck is a 2017 2500hd Denali diesel. So all my factory uplifted switches are spoken for all factory features.

Thank you.

Well the first picture is similar to the one in my truck. Just a different color. Well I added a 5 aux switch panel to it today. I didn’t want to cut into my dash just to add some switches. Plus I wanted it to look factory. So since the fold down compartment for the eye glasses isn’t really big enough to hold glasses. I decided to use that space. So I cut out the hole with my router table. Then Cut out couple of abs panels with a rectangle hole in it. big enough to snug the switch panel body into it. And drill a small hole on each corner of the abs panel. This becomes my mounting plate. Then Epoxy one abs panel to the back side of the compartment. And the second one. I epoxy that to the switch panel body. Then screwed ( using the 4 holes i drilled ) the switch panel to the abs panel on the back side of the compartment. It turned out amazing. What do you all think of it. So my gmc truck is 2017 2500hd Denali. And this kit is made for newer trucks. So I have to extend all the wires, and hardwire it in. ( gotta find abs locate couple of wires on the truck to tap into to make the switches work with the leds ). Since I don’t have the factory plug that this kit comes with. Plus I have to find a place to mount the fuse / relay box.

Well the first picture is similar to the one in my truck. Just a different color. Well I added a 5 aux switch panel to it today. I didn’t want to cut into my dash just to add some switches. Plus I wanted it to look factory. So since the fold down compartment for the eye glasses isn’t really big enough to hold glasses. I decided to use that space. So I cut out the hole with my router table. Then Cut out couple of abs panels with a rectangle hole in it. big enough to snug the switch panel body into it. And drill a small hole on each corner of the abs panel. This becomes my mounting plate. Then Epoxy one abs panel to the back side of the compartment. And the second one. I epoxy that to the switch panel body. Then screwed ( using the 4 holes i drilled ) the switch panel to the abs panel on the back side of the compartment. It turned out amazing. What do you all think of it. So my gmc truck is 2017 2500hd Denali. And this kit is made for newer trucks. So I have to extend all the wires, and hardwire it in. ( gotta find abs locate couple of wires on the truck to tap into to make the switches work with the leds ). Since I don’t have the factory plug that this kit comes with. Plus I have to find a place to mount the fuse / relay box.

No. But I open mine up and was able to make one to do momentary

Hey Cali Crusin, were you able to figure it out on this kit to install it on your 2017. im in the same boat man. im sure someone has a write up wiring it up with the plug. (hardwire )

Hello everyone. im new here. but i have been searching and browsing for answers. does anybody here know why this kit will not work on a 2017 gmc 2500hd. the only thing i can think of is cause of the gray plug that plugs into the factory harness. They probably didnt start putting that factory plug in till 2019 and up. if so i can hard wire it in. i just need to know what wire is what thank you

hello everyone. i am new here. recently i just bought a 2017 gmc 2500hd denali fully loaded. however, the truck is already in the shop. the ? i have are these switch panel small enough that i can possibly retrofit ( custom fab ) into the roof console using the sunglass compartment to make it look factory etc, any help would be awesonme. but i need for sure a momentary switch. and couple of latching switch. i ordered all on board air kit with train horn and airbags for it. but i have no space avaible on the orignal switch panel since this truck is fully loaded with all the goodies

so i have a couple of idea on this. i would like to maybe retro fit one of these uplifter switch panel in the roof console. since my truck is fully loaded. so all my factory panel is all being used. so the ? i have the switch panel. how long is it and could the front finish trim come off. i dont have my truck with me. its at the shop.

So what type of switches doe this kit have. is there momentary and latching. or ar they all latching switches i need momentary for air horn. two im thinkinmg about retrofitting the button panel to the upper roof console using the sunglasses compartment.

so what style switches are these momentary or latch or both