Jump to content

dsr611

Member
 View Profile  See their activity

  • Posts

    1,154

  • Joined

  • Last visited

 Content Type 

Everything posted by dsr611

  1. dsr611
    Check McGard or Gorilla. To get by the rust issue, you would need either SS or Ti alloy lug nuts ($$$) or to use a ratchet/socket instead of an impact. With the impact, you're knocking the coating off of the lug nuts every time you rattle them down
  2. dsr611
    Check with Crutchfield to make sure, but thinking this might be what you need https://www.crutchfield.com/p_541RP5GM31/PAC-RP5-GM31-Wiring-Interface.html?tp=2977
  3. dsr611
    what year truck I got a Diablo InTune when I had to rebuild my '10 and delete it
  4. dsr611
    Make sure the oil pump pickup tube is seated in the boss it fits into. When I redid my 05, I put the PU tube in, tightened the bolt and fired it up when I got everything back together. Oil pressure never did come up. Drained the oil, dropped the pan again, and found that the PU tube wasn't fully seated. Finally got it seated and everything bolted back up and oil pressure was over 40 when I fired it back up
  5. dsr611
    It's not an OEM remote start so dealership probably couldn't help. Check with a local car stereo shop or check the python site for a dealer local to you https://www.pythoncarsecurity.com/WhereToBuy/
  6. dsr611
    Been almost 4 years...I'm pretty sure the truck has been bought by now, either by OP or someone else, or owner decided to keep it for himself
  7. dsr611
    From another post they've made... Good luck though
  8. dsr611
    https://www.rockauto.com/en/parts/wve,5S13677,impact+/+crash+sensor,1564
  9. dsr611
    What are we looking at here?
  10. dsr611
    Yes, it's possible that the AFM could be deactivated...only way to really know (if you don't have the capabilities to read the programming) is to ask the previous owner. But, with 4000 miles on it when you got it, I doubt it was deactivated. When I had the lifters/cam replaced due to the ingenious AFM crap and deactivated that mess, I went from about 17 mpg up to a little over 18 mpg The oil consumption rate is par for the course with this generation of 5.3s. There is a night/day difference in the pre-AFM engines and the AFM engines in oil usage.
  11. dsr611
    https://www.hubbfilters.com/cleaning-system
  12. dsr611
    There use to be a thread on here about this issue but I can't find it. I did find this youtube video about the squeaking and rattling and it even has a link to the parts on amazon if you want to replace with oem parts.
  13. dsr611
    If you raise the bottom part of the seat and look under it, close to the back wall, you'll probably see some pieces of broken plastic. There is a "hook" (for lack of better terms) on the back of the seat upright that latches over a loop on the back wall that keeps the seat back from falling forward. I'd bet the plastic has broken and the metal "hook" is rubbing on the loop, causing the squeaking. You can pull the seat out and put some heat shrink or electrical tape over the hook
  14. dsr611
    Check Crutchfield
  15. dsr611
    On a '23 with that few miles, you don't fix it. You find some way to get it to the dealership service department and let GM fix it
  16. dsr611
    They tend to do that on occasion
  17. dsr611
    https://offroadmotorist.com/gmc-tri-mode-power-steps-troubleshooting/
  18. dsr611
  19. dsr611
    Pull cluster out and replace lights and stepper motors (if your's haven't failed yet, you're lucky)...there's places on the interwebs that will do it for ~~~$150 or so fi you're not adept at soldering. May even have someone local to you that does them.
  20. dsr611
    Do you (or anyone else for that matter) know if there's any programming that goes along with this airbag recall work? I keep getting the notices but the truck ('11 GMC Sierra 3500HD Denali with Duramax/Allison) has been tuned/deleted. I'd hate to take it in and have it done and the programming screw with the tune
  21. dsr611
  22. dsr611
    Guessing you didn't bother reading this or you would find your answer
  23. dsr611
    With as many details as you've given us, I'd recommend these...
  24. dsr611
    Either the new belt is too long, the new belt is routed incorrectly, or tensioner is bad
  25. dsr611
    Few years older than a 2020, but this may help

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,743
    Total Members
    8,960
    Most Online
    JJ_Denali2020
    Newest Member
    JJ_Denali2020
    Joined

  • Who's Online   1 Member, 0 Anonymous, 784 Guests (See full list)

×
×
  • Create New...