Jump to content

Engine stops running after "warmed up"?

adramto

Recommended Posts

adramto New Member

adramto

Posted
Posted
*Update* I was just the ignition module going bad. I replaced the coil too.*                                                                 I have replaced the o2 sensor, the coolant sensor to the computer, MAP sensor, fuel pump, fuel filter, fuel pump relay. Am going to replace teh EGR and EGR solenoid tomorrow. The engine stops running after it has "warmed" up and after replacing the above mentioned parts (except EGR parts) that are heat related , it still stops running. What else do I need to do? Any help will be greatly appreciated.     ??? :jester:
CMNTMXR81 Senior Enthusiast

CMNTMXR81

Posted
Posted

Well, it seems as if you've covered enough on the fuel side.  How about the ignition side?

 

If it just shuts down, perhaps it's in the computer.  Sounds like once it gets back into closed loop, something isn't computing.

adramto New Member

adramto

Posted
  • Author
Posted
Ok, yeah that will have to be my next task. Changed the EGR valve and solenoid, spark plugs, wires, cap and rotor today. It ran longer, but still stalls after about 10 minutes. I will have it towed to work tomorrow to have one of the 01 techs scan the computer. I can't get any codes to come up, hopefully something shows up.  :jester:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    343,007
    Total Members
    8,960
    Most Online
    Brendan C
    Newest Member
    Brendan C
    Joined

  • Who's Online   0 Members, 0 Anonymous, 876 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Grumpy Bear
      Joke Thread

      By Grumpy Bear · Posted

    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      You're better read than that Atlas. 😏   British science fiction writer Arthur C. Clarke formulated three adages that are known as Clarke's three laws, of which the third law – that "any sufficiently advanced technology is indistinguishable from magic" – is the best known and most widely cited.   Stribeck and the pivotable Hersey Number isn't voodoo nor snake oil. That part is physics. It's what marketing and bean counters do with it that is snake oil and voodoo.    Stribeck is the relationship between Hersey and the Coefficient of Friction. Within the Hersey Equation if viscosity and viscosity is 'Dependent' on.......heat.......and.......viscosity index or the temperature to viscosity slope.    Specifically Hersey is the viscosity AT THE TEMPERATURE IN THAT LOCATION FOR THAT SLOPE.   Hydrodynamic lubrication exist when the film thickness in the location is 3X the Ra roughness of the surface. This is irrespective of the hardness of the substrate. To obtain that thickness X viscosity is required for Y velocity at Z load. That's a lot of moving parts. It is also impossible to maintain in an ICE but nearly possible with a turbine under constant load.    What does that mean? Error heavy and operate light. Wear is inevitable but the rate of wear and the milage obtainable are a function of prevailing conditions and HABITS. The only penalty is viscous drag and at fractions so low as to be well worth the effort. Double the life, half the manufacturing carbon foot print. Greed is the only impediment.    The materials generated by SwRI are the RESULT not an estimation or a hypothesis.    Don't delude yourself sir, EV's have as many pitfalls as ICE's. We just don't know what they are yet and it will take longer to sort as MARKETING and GREEDY CEO's have had more time to polish the turd they are selling. 
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      You can always count on greed to prey on ignorance and stupidity.    Friend bought a 2019 Ford Flex and asked me about using Valvoline R&P 5W30 in it. Told him give the miles on it and the fact it wasn't yet using oil that it was a good plan. He uses a Valvoline quick change shop for his oil service.   First they tell him that isn't the oil the OEM recommends. He told them he didn't care what the OEM thought. Then they floated the, "But it will void your warranty"    His reply was it's a 2019, there is no warranty and informed them their knowledge of the law was lacking.    Then they tell him 'But it will ruin your motor"!.    Mine to ruin he says. Finally they give in and charge him 150% the semi-syn price    Point it the brainwash is so embedded that even the service industry is drunk on their swill. The public is right behind them. Echoing the same lies on every forum and media platform. If the end goal is indeed EV then I'd say that ship is about built. 
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Diesel hit $6.00 here today at the truck stop.   Payed $2.79 for E85 today too.
    • richard wysong
      Electrical Problem - solved

      By richard wysong · Posted

      Thanks for posting, I'm sure it will help someone

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...