2 level kits

[Cocacolacowboy]

New to forum.... I have a 2015 Silverado I purchased from the dealer and they installed a 2" Fabtech level kit, top spacer. It doesn't sit quit "level" so I was wondering if I could add a Rough Country level kit, bottom spacer, without doing any damage to any of my suspension conponents?

[SgtShiv]

I'm thinking 2-2.5 is all you can do without making other mods due to cv and uca angles.

[chevy15]

2.25 makes it perfectly level - Ready Level Kit

[1badtie]

I have the same problem put a 2" kit on and it's not enough putting the RC 2.5" kit front only on in a few weeks

[SgtShiv]

There will be some variation from truck to truck. I did the RC 2.5 and still had a slight rake, but not nearly as noticeable as it was before. I started with a measurement of 36" in the front and 39 1/4" in the rear from the lip of the wheel well to the ground and moved up to 38 1/2 and 39 1/4.

[Cocacolacowboy]

Thanks!

[Nolasaintz]

You can add a 1/2" lower shock spacer from Ebay/Amazon, they only cost about $20 bucks shipped.

 

Motofab sells some on Ebay...I have the 1", and it's good quality.