Vinyl Wrapping Mirrors and Door Handles

[StayInYourLayne]

I have the chrome door handles and mirror caps and I have been thinking about vinyl wrapping them white to match my paint. Does anyone have any experience wrapping them? I was thinking about using the Glossy white 3m 1080 vinyl wrap, I have heard it is a pretty close match to the summit white paint.

[Strykers_Inc]

I did two sets of mirror caps for mine. Basically a primary and alternate set in case one set gets nicked or something. Make sure they are clean and remember that 3m prep is your friend. It helps with bonding. Use a heat gun, but be careful on the sharp angles. Too hot and the plastic will cut the film.

[Strykers_Inc]

I have the chrome door handles and mirror caps and I have been thinking about vinyl wrapping them white to match my paint. Does anyone have any experience wrapping them? I was thinking about using the Glossy white 3m 1080 vinyl wrap, I have heard it is a pretty close match to the summit white paint.

 

I did two sets of mirror caps for mine. Basically a primary and alternate set in case one set gets nicked or something. Make sure they are clean and remember that 3m prep is your friend. It helps with bonding. Use a heat gun, but be careful on the sharp angles. Too hot and the plastic will cut the film.

[StayInYourLayne]

I did two sets of mirror caps for mine. Basically a primary and alternate set in case one set gets nicked or something. Make sure they are clean and remember that 3m prep is your friend. It helps with bonding. Use a heat gun, but be careful on the sharp angles. Too hot and the plastic will cut the film.

Okay thanks for the advice, how's your's holding up?

[Strykers_Inc]

Okay thanks for the advice, how's your's holding up?

Check out my build and see for yourself. Most of my carbon was wrapped last year and it's still perfect. I make sure and put a bit of zymol titanium -or- mcguires black on it every now and then and still looks new.

[StayInYourLayne]

Check out my build and see for yourself. Most of my carbon was wrapped last year and it's still perfect. I make sure and put a bit of zymol titanium -or- mcguires black on it every now and then and still looks new.

Okay cool thanks!