stock 16" rims to 20" rims. need help.

[Tyler Bren]

I have the stock 16" rims on my 2003 gmc 2500hd and as a gift i got 20" mb wheels. I installed them and they rub on the front, right on the downside rear of the bumper and on the wheel wells. Was considering installing a leveling kit or lift kit. Is there anyway i can get these to fit with the least amount of rub on the completely stock pickup? Havent cranked the torsion keys or anything so far.

[nekkidhillbilly]

level it im sure would fix could trim it slightly if needed too.

[fondupot]

No need to buy anything yet. Crank your torsion keys a few turns. If I recall, 1 full turn should be about 1/4" of lift in the front. Don't go crazy maxing the torsion keys out tho.

 

whatever you do, make sure you get an alignment afterwards. Adjustment of the torsion keys will change front end geometry, and your brand new tires will wear like shit if you dont get the truck aligned.

[8Point1]

An 03?

 

 

Trim the corner of the bumper.