Jump to content

LTZ arm rest broken-replacement ideas?

oldmann
 Share

Recommended Posts

Robert A New Member

Robert A

Posted
Posted

My passenger side has been broken from the day I bought my '12 Suburban.  I've been looking since then to find a way to get this fixed without buying the whole panel.  The video a few posts back looks like a solution, but someone should sell panels with the fix already in place!

  • 4 weeks later...
2Busy2Car New Member

2Busy2Car

Posted
Posted

Hey there, I had the same problem in a 2013 GMC Chevy Silverado HD and I sprayed gap filler foam stabilizer inside and it seems to be holding up really well! I had just used the stabilizer foam to fix my cracked shower tray and it gave me the idea to try it on the truck door.  I could’ve thought about it more and made it fit better with less clean up (I didn’t have the door pieces totally set in place and the foam started oozing out everywhere) but I’m still happy with it.  I’d imagine if you drilled a small hole under the grab bar/armrest, you could fill it up with the straw and have very little clean up. It hardens within an hour too! Feeling pretty proud of myself considering I nearly pulled the trigger on a $500 door panel. Definitely wear gloves, it’s polyurethane-based and nearly impossible to get off your skin as I learned the hard way!!

  • 3 months later...
Fish1552 New Member

Fish1552

Posted
Posted

This seems to be an even easier fix.  Just pull back and squeeze in this stuff, let it cure for 2 days before really pulling hard and it's strong.  Guy even says 5 months later, it has hardened even more and is very strong.  Hell, it can't possibly be worse than the stuff GM put in it. 

 

  • 4 weeks later...
ChanceX New Member

ChanceX

Posted
Posted

So I'm new to this website, but I'm loving it so far. Alot of useful information, thanks to everyone for that. I have the same issue with the door pull being broken. When I bought my 14 suburban both front doors were broken like that, and the dealership fixed the driver side but not the passenger side. I didn't know until my passenger said the crack in the handle pinched her finger. Im still looking for a replacement door panel at auto yards around me but haven't found one thats the exact same as mine. I ended up doing the parachord fix and it doesn't look too bad. I first used some flex fix silver hvac tape to secure it and keep it from flexing since it doesn't stretch, and black gorilla tape to reinforce it and give it texture for the parachord to grip on to since the silver tape is very smooth. Then tightly wrapped the parachord and making sure it was tight with no loose spots by twisting it with my whole hand before finalizing it. It came out pretty good and definitely is stronger. Ill attach a picture of it finished. I wish i would of took more pictures for people during the process but didn't think about it til now. 

20200813_092558.jpg

  • 3 weeks later...
ggg New Member

ggg

Posted
Posted
On 1/26/2018 at 2:09 PM, grogman45459 said:

So now, almost 2 years later,  my passenger side interior arm rest/grab handle has now broken so I decided I had to do something. 

 

Not wanting to to spend $1,000.00 at the dealership to have both interior door panels replaced with the same inferior design panel had me looking elsewhere. I found a POST under a more extensive repair video on YouTube where a guy said to use paracord to repair it.

 

So I went to Walmart and picked up 2 packs of 16 ft. black paracord at $1.97 each in the arts & crafts aisle. I tucked one end of the cord in the seam under the door handle and then wrapped it tauntly the length of the handle and then tucked the end in the  seam on the other end. 

 

It fits and works perfect!! The cord gives added strength to the handle and minimizes then flex in the handle. Here’s what it looks like.

009B9022-99AC-46EE-98C9-7B6F3AF02D72.jpeg

 

  • 1 year later...
Charles Crosno New Member

Charles Crosno

Posted
Posted
On 8/15/2018 at 7:57 AM, jatkinson8755 said:

Thats not even that bad looking !

 

If anyone could spare a broken door skin, I will fabricate steel or aluminum brackets to permanently fix this stupid problem.

 

If you can spare a door skin with a broken interior handle, please pm me.  I will make a fix for you and send it back.

 

If you cant spare the door skin, then let me know the part number and I will just buy 1 and get in our shop and design a fix for it.

Would you have some already made up …. 2013 Silverado 

  • 2 months later...
Jerry Steger New Member

Jerry Steger

Posted
Posted
On 8/15/2018 at 6:57 AM, jatkinson8755 said:

Thats not even that bad looking !

 

If anyone could spare a broken door skin, I will fabricate steel or aluminum brackets to permanently fix this stupid problem.

 

If you can spare a door skin with a broken interior handle, please pm me.  I will make a fix for you and send it back.

 

If you cant spare the door skin, then let me know the part number and I will just buy 1 and get in our shop and design a fix for it.

I have a  2008 Chevy Suburban 1500. On another post you asked if anyone had a piece they could send you so you could fabricate a fix for them. I have mine off and could send it to you if you are still interested. Wanted to email you but on this forum I don't know how. You can PM me at jsteger52 through gmail if you wish.

  • 8 months later...
MsAv8tor New Member

MsAv8tor

Posted
Posted

2013 Silverado LT - Same problem with broken door handle. Ordered one from a salvage place and it was broken. Returned it. Have searched for 6 months and still no panels. You would think Chevrolet would have a replacement part not a grand fix for this. 

  • 1 year later...
  • 5 months later...
ryan35205 New Member

ryan35205

Posted
Posted
On 11/24/2023 at 9:09 PM, dlowey said:

I don't believe I can add pictures, but I am currently 3D printing replacements parts for my broken door arm rest.

 

How did that turn out?

  • 7 months later...
Nogear New Member

Nogear

Posted
Posted

Dorman  now makes a replacement - but only for the doors that have the door handle above the armrest. Still looking for a supplier that has the other option, handle below armrest.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • asilverblazer
      VSE CCV Bypass - Anyone have this installed in their L5P?

      By asilverblazer · Posted

      Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...