0.5 inch Wheel Spacer

[XMR15]

Anyone that is running a 0.5 Inch wheel spacer? Can i get away with running them with factory studs and still have sufficient thread?

[wildwilly1]

i am runnint the readylift half inch fits perfect on factory studs no problem

[XMR15]

i am runnint the readylift half inch fits perfect on factory studs no problem

Thank you.

[rcoles871]

Thank you.

 

I ran 1/2" hub centric spacers on my 2015 F150 but switched out studs to some that were 3/8" longer. As the previous commenter said they will fit and you will have some thread engagement, I just wasn't comfortable with losing 1/2" of engagement.

[Bayou-AllTerrain]

I ran a set on my truck for a couple of weeks and they were fine. Still good threads there. I took them off because I had better tire clearance without them.

 

 

Sent from my iPhone using Tapatalk

[barrett05]

xmr15 im having the zone 4.5 installed monday on a 16 all terrain, did yours end up pretty much level or is it nose high or low in person. mine sits 3 inches lower in the front stock and hoping for the truck to be level after the lift, dont understand how a 4.5 front lift and 4 inch block in the back could make it level when its 3 inches lower in the front. even taking out the factory rear block seems like it would still sit about 1.25 inches higher in the rear.