Jump to content

How to open hood, cable broke, 2000 jimmy

EvRoCo

By EvRoCo
in Ask A GM Technician

Recommended Posts

EvRoCo New Member

EvRoCo

Posted
Posted

My hood release cable seems to not be functioning. I need to jump start my battery, so this is a big problem right now. I have seen a few youtube videos - one using a coat hanger, another where the guy reaches through his grill to manually grab the cable. Neither of these seem possible with this vehicle. The 2nd method is a no go as his truck must not be the same year/model. The 1st method...well maybe I just haven't spent enough time fishing around with the coat hanger. Is there some easier way that the pros handle this situation? Is there a special tool for this task? I had just started looking at new trucks, but need this to get me by in the meantime (and these are definitely uncertain times lately! ). Any help or advice would be greatly appreciated. Thanks!

davester Senior Enthusiast

davester

Posted
Posted

Where did the cable break?  If it broke in the cab, try cutting the sheath until you can get to the remaining part and pull it using visegrips.

 

If it's broken in the engine compartment, I don't know what a good, non-destructive way to do it for your truck.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • txab
      Gas Prices

      By txab · Posted

      The whole story is false. The screw is there as a temporary fix to allow the pump to even turn on. When the nozzle is returned the pump shuts off.. At this point people are just being punked   https://youtu.be/1DtlaEuHXAA?si=06mrRmw9HLUwdeRk   https://www.facebook.com/share/v/1CyRZdsaSc/ https://www.facebook.com/share/r/1DxV1Hyrqi/       SNOPES: https://www.facebook.com/share/p/19HPYUnRik/
    • newdude
      2027 GMC Sierra: Official Discussion

      By newdude · Posted

      Follows the motif on the Sierra EV.  Satin finsh to the lower bumper area, painted above:   Elevation       Denali      
    • taze
      I love my truck but

      By taze · Posted

      Not exactly what I was hoping for, but I do like it. I wonder if they'll bring back Smokey Quartz Metallic? 🤔 https://gmauthority.com/blog/2026/06/here-is-the-all-new-2027-gmc-sierra-1500/
    • tjonesdfw
      2027 GMC Sierra: Official Discussion

      By tjonesdfw · Posted

      Whoever greenlighted the work truck matte black front bumpers on every trim but the AT4X should be fired!  I was hoping that was an AI mistake, but just realized they were on every model of the 2027 Silverado too.     Some parts of the interior do look premium, but the Denali Ultimate dashboard looks like an afterthought.  At least they appear to have lost the microfiber the high end Silverado models showed, but the '27 High Country dash looks better than the Denali.  
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      New member here. I am researching a read-first event-recorder concept for late-model GM V8 trucks. This is not a sales post. There is no product link, price, preorder, or mailing list. I am trying to determine whether the underlying problem is real before building anything.   Has your truck ever had a brief problem such as: - rough running or a momentary misfire - an oil-pressure warning or unusual pressure event - reduced power or a brief stall - a U-code or lost-communication problem - a symptom that disappeared before the dealer or independent shop could reproduce it   If so, I would appreciate the following details: - year, model, engine, and mileage - what happened and under what conditions - whether a DTC and useful freeze-frame data were stored - whether the shop was able to reproduce it - what the eventual confirmed repair was, if known - what additional information would have helped the diagnosis   The concept being evaluated is a removable leave-in recorder that continuously retains a rolling window from before and after an event. It would not tune, reflash, clear codes, or change the vehicle calibration.   I am also not claiming that it could predict lifter failure or see every internal ECM variable.   The real question is whether continuous event history would add enough useful evidence beyond freeze frame, GDS2, and existing scan tools — or whether it would simply be another unnecessary gadget.   For owners and technicians, which problem would make something like this genuinely useful: 1. intermittent misfire or AFM/DFM-related behavior 2. oil-pressure events 3. lost communication or electrical faults 4. none of the above Please be blunt. Negative feedback is just as useful as positive feedback.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...