Jump to content

2004 Sierra 1500 5.3L Coolant Leak

jmassi

Recommended Posts

jmassi Enthusiast

jmassi

Posted
Posted

Ok guys, here's what I got. My dad has a 2004 Sierra 1500 4x4 5.3L w/40K miles on it. He noticed coolant leaking so he went to his buddy who is a mechanic and the two of them looked for over an hour and could not find where the leak is coming from. They did a pressure test, and it slowly lost pressure. Everything under the hood, engine, hoses, lines, water pump, engine block, radiator, all are bone dry. The only thing that's wet is a wire loom thats underneath the front of the engine where the harmonic balancer is. This wire loom is for the four wheel drive (which works perfectly). My dad's buudy has been a mechanic for over 40 years and my dad has been working on cars for the same amount of time and both of them are stumped (so am I!). Any ideas as to where this leak could be coming from? Any input would be greatly appreciated.

Thanks!! :driving:

Norseman Senior Enthusiast

Norseman

Posted
Posted
intake manifold gaskets are nitorious on those things

 

 

 

Nope, can not be intake manifold related. It is the water pump gaskets. Use the metal Fel-Pro gasket to fix your problem.

jmassi Enthusiast

jmassi

Posted
  • Author
Posted
intake manifold gaskets are nitorious on those things

 

 

 

Nope, can not be intake manifold related. It is the water pump gaskets. Use the metal Fel-Pro gasket to fix your problem.

 

 

 

 

Norseman, you were right. My dad went to his mechanic buddy and once they tore into it, they found out that it was the water pump gaskets. He replaced them and all is well. :D

Norseman Senior Enthusiast

Norseman

Posted
Posted
intake manifold gaskets are nitorious on those things

 

 

 

Nope, can not be intake manifold related. It is the water pump gaskets. Use the metal Fel-Pro gasket to fix your problem.

 

 

 

 

Norseman, you were right. My dad went to his mechanic buddy and once they tore into it, they found out that it was the water pump gaskets. He replaced them and all is well. :D

 

 

 

 

 

Thanks for the up date! Yep, 99% of the time if you have a coolant leak on these 5.3L, 6.0L, etc. it is gonna be the water pump gasket (or at least that's where I always start looking), and the fix is the metal Fel-Pro gasket. :D

99xjsport06 Enthusiast

99xjsport06

Posted
Posted

Interesting....been trying to track down a coolant leak that also shows no symptoms on my step dads 04 with the 5.3. I'll definitely look into the WP gasket.....how hard is it to change on the 5.3? I don't have any repair manuals for this thing....looks like i'll have to invest in an el cheapo Haynes or Chiltons untill I can come up with a FSM for it.

Norseman Senior Enthusiast

Norseman

Posted
Posted
Interesting....been trying to track down a coolant leak that also shows no symptoms on my step dads 04 with the 5.3.  I'll definitely look into the WP gasket.....how hard is it to change on the 5.3?  I don't have any repair manuals for this thing....looks like i'll have to invest in an el cheapo Haynes or Chiltons untill I can come up with a FSM for it.

 

 

 

 

Not hard at all. Couple of hours. Remove drive belt, don't bother takin' the fan off just unbolt (6 bolts, 3 each side) the pump clean surfaces of pump and block (I use paint thinner). Then put the new metal Fel-Pro WP gaskets on the pump held in place with the bolts, and bolt to the block to proper torque. Put belt back on, top off coolant and job is done. Easy! :loser:

C & A s Dad Senior Enthusiast

C & A s Dad

Posted
Posted

Norseman, I am just curious. If the truck had say 50K on it would you not recommend going ahead and replacing the pump while you had it off?

 

It would seem to me that it would simply make sense to replace it since you had gone this far. Of course, I am in the Auto Parts business, so I would naturally recommend this. LOL :loser:

 

Just wondered how you felt about this.

Norseman Senior Enthusiast

Norseman

Posted
Posted
Norseman, I am just curious. If the truck had say 50K on it would you not recommend going ahead and replacing the pump while you had it off?

 

It would seem to me that it would simply make sense to replace it since you had gone this far. Of course, I am in the Auto Parts business, so I would naturally recommend this. LOL  :lurk:

 

Just wondered how you felt about this.

 

 

 

 

 

Sure, If you feel like spending the extra money for a new pump. Lets see, I've helped my friend on the weekends at his shop when he gets backed up from the previous week for a while now, I've done around 6 of these now just replacing the gaskets and none have come back. Those pumps are really hardy and the job is so easy if you're gonna do it yourself why not just replace water pump when it really wears out? If the job involved removing a timing belt cover to get to the pump like a lot of JapJobs require then I'd say sure definitely change it while you're in there, but that's not the case so why waste the money?

 

Not trying to take business away from you, just tryin to save some one a few bucks :cool:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      MPG at 600 miles

      By Chuck FB · Posted

      I would have to read back to get a better picture in my mind of some of the other comments and what they were using for a driving scenario they based the fuel mileage off of. That is why the fuel mileage conversation is extremely difficult to make fair comparisons from. If I was to be living in town and only driving around town, light to light and some longer stretches that doesn't have a light every block, and the usual stop at a grocery store and the bank and so on and so forth, my fuel mileage even during the summer time would be so bad with my truck I don't even want to know how bad it would be !. Then add in winter time and idling to warm it up to clear the windows and driving through snowy streets etc, large heavy trucks with gas engines have NEVER been worth crap for fuel mileage and why some little pot licker of a car with wheelbarrow tires and a 1300 cc four cylinder non turbo engine was the ticket to using a mere fraction of the fuel over a full size pickup.    By the way my truck has the 34" tires as its a HC but not the BFG KO3 tires ( that was an option for my truck but the sales guy couldn't figure out what the tires actually were so that never got on the order until it was too late to change the truck order ). So what fuel mileage your getting actually sounds good for "town driving" and with my truck when I go to town the fuel mileage keeps increasing as I get closer to town because it takes quite a while to get the driveline oils warmed up ( and why it always shows better fuel mileage on the return trip from town because its already warmed up ) but once I am in town that fuel mileage average just keeps dropping the more I mess around town and then has to recover back to something reasonable again by the time I get home for an over all average.    I'd be curious what your sticker says for the factory weight of your truck, mine is close around that 7700 lb due to the options it has. But anyway the long and short is, vehicle weight, higher rolling resistance heavy tires and a hefty driveline and a relatively large gas engine make for crap fuel mileage in stop and go scenarios, all one can do is drive it easy off the line at each stop and as my dad had said over the years, drive like a raw egg is under your foot and that's the best one can do. Years back with a carbed engine and if the carb was getting a bit out of tune etc as would the ignition system, the fuel mileage on pickups with larger engines was just awful compared to what your getting. We pay the fuel price penalty for driving HD trucks over some little vehicle, that is the reality. 
    • diyer2
      Navigating senior years.

      By diyer2 · Posted

      Speedy recovery.
    • KARNUT
      Slate Electric Truck

      By KARNUT · Posted

      We had two Toyota’s with that engine in the mid 80s. We had 50 gallon fuel tanks, a toolbox full of tools, an air compressor and assorted parts for our equipment. We beat those up and down pipeline ROWs until we started buying diesel trucks. Then they became parts runners and first vehicles for our teenagers first cars. Our shop Forman wrecked them both two years apart when we hired him out of high school as an apprentice. Good thing he’s an excellent mechanic. It took awhile before he could be called a good driver.
    • diyer2
      Gas Prices

      By diyer2 · Posted

      $4.26 85 oct 
    • William Aldrich
      Bent valve in 2025 GMC Canyon Denali - Requires engine swap at 14K miles

      By William Aldrich · Posted

      I have a 2025 GMC Canyon Denali.   On a trip recently the engine failed.  The dealership diagnosed a bent valve and says there is a service bulletin that indicates to 'relace the engine'.  The truck only has about 14K miles and is under warranty.   The failure occurred 5/11/2026.   So far I have worked with GM Customer Assistance and Roadside Assistance.  Evidently no engines are available and nobody will offer a date when a new one will be.   Coming up on two months with no repair or timeline and no loaner from the dealership.   GMC Customer Assistance is 'ghosting' me and keeps closing the cases I've opened with no resolution.   Hoping someone can help me on how to escalate this issue.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...