Jump to content

Weird Exhaust Smell..


Recommended Posts

Posted

okay well the other day me and my girlfriend were on the way to the store and she had just walked around the back of my truck and i hear " EWW whats that smell OMG that stinks" then she opened my door and i smelled it to... and it smelled like burnt wires... and now come to think of it the other day on lunch when the guys opened the doors i smelled it too... what could make it smell like that... i do know that it is slowly leaking anti freeze... i had it looked at told it was nothing bad so i opted to take care of it when it got warm... so give me you opinoins the truck is running kinda rough on idle... and its suckin gas a little worse then usual... let me know what you think? cuz i'm stumped...

 

 

thanks in advance... steve

Posted

If it is... "running rough and sucking more gas than usual"... and since you have the odd smell from the exhaust.. I would guess it is running rich and the smell is from the cat converter trying to burn all the excess fuel. Without too much luck. :D

 

Have you had the codes pulled? Is the SES light on?

 

Give us more detail on the Running Rough problem.

 

Texas Jim

Posted
If it is... "running rough and sucking more gas than usual"... and since you have the odd smell from the exhaust.. I would guess it is running rich and the smell is from the cat converter trying to burn all the excess fuel. Without too much luck. :rant:

 

Have you had the codes pulled? Is the SES light on?

 

Give us more detail on the Running Rough problem.

 

Texas Jim

 

thanks for the reply jim and no i have not had the time to get it in iv'e been on the road with work lately so i've needed it unfortunately, as fora as the running rough problem.. say i'm stopped at a light... at like 4-5 second intervals the truck kinda rumbles a little bit.. and i'm used to it running so quiet... also it seems like its gotten a touch louder with this new problem... i know that it is leaking collent slowly from underneath... and to answer your question no the ses light is not on.. i'm gonna take ur advice and have the codes checked ASAP...

 

thanks for the reply let me know if you think of anything else!

 

steve

Posted
My water pump gasket was bad, and it made it stink like antifreeze before now its good, but my MPG didnt really change much. The burnt wires im not sure about.

 

 

thanks! i dunno.. it might very well be the antifreeze problem because it stinks... but it definitly has like a burning rubber smell to it... and its not all the time... once every other day i smell it...

 

thanks for your help!

 

steve

Posted
Does it kind of smell like rotten eggs? If so, it's a bad cat, which would explain the drop in fuel mileage.

 

it has more of a burnt plasticy kinda smell to it... and the millage isnt terriley worse but it is noticeable...

 

thanks for the help!

 

steve

  • 2 weeks later...
Posted

not sure if this was the exact cause of the smell problem.. but i had the water pump changed out last week... she quit on me and was droppin coolant... so far soo good were dry as a bone...

 

thanks for all your help..

 

steve :crackup:

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Diesel or gas?  The 37s will obviously, drastically reduce mpg, but the gasser will take a bigger hit to mpg, and power.    I wouldn't sweat a gear change on a duramax at all, and unlikely on the gasser either. You're obviously not concerned with acceleration or towing, and the 10spd will find itself in the right gear without much hunting, if any. 
    • I understand. It is disturbing to think a manufacture asks so much and gives so little in engineering support. This is not a GM issues, this is a greed issue and one the ALL practice.    My intent was not to remove the wind from anyone's sail but rather to point out the areas deficient so that they can be discussed with improvements the goal. But to do that you have to know the truth and what that truth is.    The commercial interest are honed in on a few select issues in which they control all the variables and are not forthcoming in the least with their customers about the details. Failure is the only thing that drives these people to improvement. One way not to fail it to manage public "expectations". The set a bar they can clear and put their thumbs under the suspenders with chest puffed.... Only the internal data tells the story fully. As we don't have access to that for decades then we have to generate it ourselves. UOA's with data that matters.  
    • I had skimmed through that article when you posted the link and honestly I felt rather defeated in a sense and realized that all these years in changing oil that in fact putting in what I was told was a good quality oil was probably not filtered as well as it should be although the filter put on the engine would be what ( as long as it never went into bypass mode ) would be the final filtering of the new oil that the engine components would first see, but then the filtering media itself is not up to par to what is ideal because a full flow filter would be too restrictive to filter fine enough for the engines best outcome in the long run. Only one of our tractors over the years which was a Versatile with a 855 Cummins had a separate bypass filter, some engine manufacturers did spec a partial bypass system within the main oil filter but I don't believe any other trucks or equipment I was servicing used such a filter. No doubt a product like the Amsoil bypass system is of benefit as long as nothing goes sideways with the extra plumbing and filter such as a rupture/leak that could cause the oil to pump out of the engine ( yes that Versatile had a remote canister with hoses routed to it as well ). With the idiot egr system on a diesel and as a result forcing a lot more soot into the oil, that certainly isn't helping the diesel engines cause or as you pointed out the GDI engine issue with creating more soot and aside from having a fancy secondary filtering system, changing the oil more often helping lower the total soot load.     So oil manufacturing and the end product is not something one can control and I wonder if there are specs on what various oil packaging companies produce in particle count or size. As to the filtering, if the OEM is not designing a filter size and spec that is really what it could be, they too are short changing the end user and so what is the answer. Of course as you say the oil side can only do so much if the air side isn't keeping up its end of the picture and air filters are only so efficient and if in a dusty environment such as farm or construction or driving gravel roads there is a lot of dirt to filter out and some of that ends up into the air stream.    Of course the irony in places like where I am where they dump the salt on the highways but also will mix in some calcium or outright pure calcium for problem road area's, or using calcium as dust control on gravel roads, the vehicle that gets used in that environment may rust out before a properly engineered engine and maintenance finally wears out so one has to face that reality in the rust belt. 
    • Has anyone run these on their 2500?
    • have you stuck with dealer oil changes since then? I made the same switch after getting tired of crawling around under the truck, but I’ve found some dealers are way better than others about getting you in quickly. Curious if yours has been good about scheduling or if you’ve had to look elsewhere for quicker turnaround.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...