JimCost2014

Where did you buy the truck?

Kind of thought it was up at Snoqualmie, you can see all of the stumps in the lake behind your truck. Wife is getting heavy into photography, so we have been going up 410 to Crystal, snow is piling up pretty good.

Good looking truck, where was the picture taken?

Yes, thank you very much for your service!!!!! Allows all of us to have fun on sites like this.

Good choice, they last forever.

Thanks for the reply, motivation to get my on (after checking to see how much to Rhino Line them).

I have the GM metal/aluminum that I need to get on, what/where did the two "braces" come from? The CST looks really good!!!

Good looking truck!!!

You are very welcome, did it work?

Found this thread from 2017, my rear seat is stuck in the upright position! And his solution, I was able to fix it myself. There is a metal locking stop / cam that holds the seat in position. Just look at the opposite side while moving it up/down and you will notice the metal piece that i am talking about by the hinge. You need to use a flat blade screw driver and move the tab to lower the seat. and use a graphite lube or grease to lubricate the metal tab and work the seat up and down to get it working again...worked for me...sorry I can not take a picture of what I'm talking about. I hope this helps you!!

Great looking truck!!!

I would think you are throwing a code. Remote start will not work, when there is something not right. That is how I found out the CEL would be on in my 16, no remote start, and the CEL would be on shortly.

Any chance your extra key fob is in the truck?

You never know, you might see yourself in a different light...…..

Really good looking truck!

Good to hear, thanks for the encouraging words!

Any problems with yours since you have had it back? How many miles when you had the failure? Mine happened at 23100.

Still do not have the truck back. Will be a total of 18 days without it. Should have no issues with a brand new engine, but if things were not put back correctly, who knows...............

Close, not sure of which cylinder, but had a broken push rod. Dealer did tests and found abnormal wear on the cylinder walls and are replacing whole engine per GM. They said that the only broken item was the push rod.

Should be a GT or GU code. Connect with GM customer service on the site here and request a build sheet.

Probably last thing you want to hear, but has it ever leaked? Might want to check for stains on the headliner, if water has gotten into the switches, you might have a faulty switch like the last poster suggested.

You are very welcome.

I guess I fall somewhere in middle of the masses here, my 14 was a POS, and my 16 has been 99.9 % perfect. I personally think the 18 was a great decision.

Try this. Resetting the Power Folding Mirrors Reset the power folding mirrors if: . The mirrors are accidentally obstructed while folding. . They are accidentally manually folded/unfolded. . The mirrors will not stay in the unfolded position. . The mirrors vibrate at normal driving speeds. Manually fold both mirrors if they are out of sync. Fold and unfold the mirrors three times using the mirror controls to reset them to their normal position. A popping noise may be heard. This sound is normal after a manual folding operation.

It is just an image on the screen, does not function. Did not move on my 14 or the 16 I have now.