Need Help Finding Cup Holder Guys

Jnk · November 16, 2009

I have a project that I will be working on and I need a cup holder or cup holder/tray combo kinda like this one. I want it to be new though. Not small or huge and not cheesy, oem style if you will. I looked up gmpartsdirect but I suck at trying to find what I want. I can't navigate their page. Please help. Thanks

Mazer18 · November 16, 2009

I just picked up one of the generic ones from Wal-Mart. Might be a little big for you though if you don't want something too huge. I'd guess it's about 1 foot to a 1.5 foot long by 8 or 9 inches wide. Has two cup holders, three trays of different sizes, and a 4 coin slots along the side for each type of coin. The size and low profile keep it in place really well. I've never had it slide on me at all.

These here shown from gmpartsdirect.com are a whole lot smaller. http://www.gmpartsdirect.com/results.cfm?s...number=19154712 I can't see how they mount though and I think they sure look like they'd tip over easy while driving if not mounted in any way.

EDIT: I'm not sure about other model trucks but I know my WT has cupholders in the center seat that folds down. I'd imagine yours does too just incase you hadn't seen them yet.

Wingnut · November 16, 2009

Do you have the full center console?

If not...There's another one that you can use. It took me forever to find one at salvage...But it's the one that bolts into place under the dash (about where the radio is) and swings out/folds up. I've only seen a few trucks with them...But they're out there. It was a factory option.

I'll see if I can find a pic.

Wingnut · November 16, 2009

Hell...Here's one.

http://cgi.ebay.com/ebaymotors/99-05-CHEVY...=item58844bee0d

Jnk · November 17, 2009

Thanks for the replies guys. Tyler, that cup holder that you linked is the one I have in mind as a back up if I don't find nothing else . I would want to get something a little bigger. I have the center jump seat/storage space console in mine and I really like the cup holder with 3 spaces. Unfortunately there is nothing like that, that I can order. Maybe I should look at what the auto parts stores and wal-mart have to offer.

Wingnut · November 17, 2009

Hahaha! I'm a moron.

I had all images turned off last night, and didn't notice that you had an '07.

Jnk · November 17, 2009

It's ok man. It doesn't need to be out of a gmt900. I just need a medium sized oem-look cup holder.

GmPartsDirect.com · November 17, 2009

I have a project that I will be working on and I need a cup holder or cup holder/tray combo kinda like this one. I want it to be new though. Not small or huge and not cheesy, oem style if you will. I looked up gmpartsdirect but I suck at trying to find what I want. I can't navigate their page. Please help. Thanks

Please email our customer service team with your VIN and description of the part needed and we can supply the correct part number needed.

www.GmPartsDirect.com

jimlem · November 18, 2009

It's ok man. It doesn't need to be out of a gmt900. I just need a medium sized oem-look cup holder.

JNK,

If you can wait a couple days for me to get caught up on some things, I'll pull some stuff down from the rafters and I am pretty sure I have both the styles you liked. The one Tyler linked to and the one you (?) linked to on eBay. (Examples Below). They are both GM OEM parts I got off of eBay for a similar project and never used. I just collected about 5 different ones and then went thru them at home because it was too hard to match scale from so many different sized photos on the internet. At least one was sold to me as "Never used." The guy swapped out his new console for something else and claimed he never used the cup holder. That was the one with the tray area behind the cup depressions, I believe. Anyway, they were both in good enough shape to be like new with only minor cleaning. Those were the only ones I kept as I didn't want someone else's dirty, stained, and abused cup-holder in my truck either. The pics here are just examples of what I remember boxing up. If you're still looking, I'll post or PM you actual pics when I get them down.

If you can use one or both, I'd be happy to pass them along to you. They've been absorbed into my economy already so you're welcome to them. Send me a pic of the final project and we'll call it even. (I was never 100% happy with how mine came out & I'm always looking for a better idea) Let me know if still interested.

Jim

Jnk · November 19, 2009

It's ok man. It doesn't need to be out of a gmt900. I just need a medium sized oem-look cup holder.

JNK,

If you can wait a couple days for me to get caught up on some things, I'll pull some stuff down from the rafters and I am pretty sure I have both the styles you liked. The one Tyler linked to and the one you (?) linked to on eBay. (Examples Below). They are both GM OEM parts I got off of eBay for a similar project and never used. I just collected about 5 different ones and then went thru them at home because it was too hard to match scale from so many different sized photos on the internet. At least one was sold to me as "Never used." The guy swapped out his new console for something else and claimed he never used the cup holder. That was the one with the tray area behind the cup depressions, I believe. Anyway, they were both in good enough shape to be like new with only minor cleaning. Those were the only ones I kept as I didn't want someone else's dirty, stained, and abused cup-holder in my truck either. The pics here are just examples of what I remember boxing up. If you're still looking, I'll post or PM you actual pics when I get them down.

If you can use one or both, I'd be happy to pass them along to you. They've been absorbed into my economy already so you're welcome to them. Send me a pic of the final project and we'll call it even. (I was never 100% happy with how mine came out & I'm always looking for a better idea) Let me know if still interested.

Jim

Jim thanks a ton. Please send me pics or just pm me shipping $ for both those puppies if you don't have any use for them....and will do with the pics.

jimlem · November 19, 2009

It's ok man. It doesn't need to be out of a gmt900. I just need a medium sized oem-look cup holder.

JNK,

If you can wait a couple days for me to get caught up on some things, I'll pull some stuff down from the rafters and I am pretty sure I have both the styles you liked. The one Tyler linked to and the one you (?) linked to on eBay. (Examples Below). They are both GM OEM parts I got off of eBay for a similar project and never used. I just collected about 5 different ones and then went thru them at home because it was too hard to match scale from so many different sized photos on the internet. At least one was sold to me as "Never used." The guy swapped out his new console for something else and claimed he never used the cup holder. That was the one with the tray area behind the cup depressions, I believe. Anyway, they were both in good enough shape to be like new with only minor cleaning. Those were the only ones I kept as I didn't want someone else's dirty, stained, and abused cup-holder in my truck either. The pics here are just examples of what I remember boxing up. If you're still looking, I'll post or PM you actual pics when I get them down.

If you can use one or both, I'd be happy to pass them along to you. They've been absorbed into my economy already so you're welcome to them. Send me a pic of the final project and we'll call it even. (I was never 100% happy with how mine came out & I'm always looking for a better idea) Let me know if still interested.

Jim

Jim thanks a ton. Please send me pics or just pm me shipping $ for both those puppies if you don't have any use for them....and will do with the pics.

You got it. Look for PM (if I can figure it out)

J.