Jump to content

Ground work


99Silver6.0

Recommended Posts

Posted

Hey JP,

 Fresh worked ground smells good doesnt it??  I know that sounds kind of retarded, but when you get out of the tractor and take a whif, aside from the diesel fumes I think it smells good!!

 

DSC00112.JPG

Posted

No, that doesn't sound retarded at all, I agree completely.  Freshly tilled soil ranks right up there with some of the best odors in life, but you gotta be a farmer to think that way.

 

DISKING.JPG

 

I also looked through your website, didn't even know you had one.  See you have one of those 88 series IHs that has gone to the three shades of red like most, what is it, a 5088?  And is that a 1086, can't tell with the loader on it.  We had one of those that got traded off four years ago now.  And hold on to that 6788, its going to be a rare tractor, only made about 200 of em.  

 

And your hay operation blows our away!

Posted

Im glad to hear someone else thinks that way.  Those old IH's are turning every which color.  Seen alot of sun, have loads of hours.  I dont think the hour meter work a couple.  Best part is they still run as good.  I just dont like where they put the hydrostat lever in them.  Its in an odd place in my opinion and makes my arm sore after a few hours of picking up bales.  Thats why I kick my grandpa out of his Deere and make him run something else.  If you are refering to the cab-less tractor in the first picture with the loader its a 1026.  It leaks hydraulic fluid horrible at the loader controls.  I should have taken a picture of that.  It is a 1086, im assuming your talking about the one with the fertilizer tank hooked to it.  I havent seen many 6788 2+2's around.  Maybe 2 or three at least around here.  I guess that thing will be around till the motor goes or something else happens to it.  I hope I got those in the order you asked.  I dont know why I never take my camera with me when I work.  With my luck I would break it.  I need some more interesting pictures.

Posted

Fresh swathed alfalfa smells good too!  K1500,  that tracked stuff is cool and that 8410T is big enough!  I havent gotten to run one of the Deere T's or a Challenger but I 'd like to sometime.  I hear the new Challengers are coming out with HID exterior lighting, that aught to be nice!  I like to take that 9300 and run through some deep sticky mud, let it pack in between the duals and then run down the road and let it fly all over the place!   :laugh:

 

This is really the only other  big tractor weve got.  Rest are small Case IH's and an old Versatile 936.

DSC00064.JPG

Posted

Speaking of the new Challengers, here they are.  I've seen them up close, I think they qualify for the title "beast."

 

MT800 (340-500hp)

caterp4.jpg

 

MT700 (185-255hp)

Jeff_GriffinMT755.jpg

 

And now, as a result of the Cat-AGCO sale, you can see Challengers on wheels for the first time.

challe2.jpg

Posted

CAT has their own line of tillage tools too.  They bought Krause plow in Hutchinson, KS where I used to live.  I want one of them Lexion 485 tracked combines, those things are big.

Posted
CAT has their own line of tillage tools too.  They bought Krause plow in Hutchinson, KS where I used to live.  I want one of them Lexion 485 tracked combines, those things are big.

Actually, the Krause deal with Cat is dead now.  It was disolved shortly after this whole AGCO thing happened.

 

As for the Lexions, Cat no longer owns half of that joint venture anymore.  They sold their half back to Claas who now owns 100% of the Lexion line, as well as the brand new factory in Nebraska.  Through an agreement the Lexions can still be sold with the Cat name on the side through Cat dealers.  They are huge, I'll say that, but I'm not completely impressed with their design.  It is totally European in design, not like all the other combines available here that were designed with our crops and conditions in mind.  Oh, and for $350K I'll let you buy one!

Posted

Those Claas combines are ugly, the CAT's looked better.  As far as Krause goes, I guess I should read Kansas Farmer a little more often, I didnt know that fizzled out.  I dont have a spare 350 grand to drop on a combine!

 

480.JPG

Posted
Fresh swathed alfalfa smells good too!

Won't get an argument from me on that one.  That and fresh soil are two of my favorite smells.  Diesel fumes aren't that bad either....

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    343,007
    Total Members
    8,960
    Most Online
    Brendan C
    Newest Member
    Brendan C
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,119 Guests (See full list)

  • Latest Articles

  • Posts

    • The oil filter has NOTHING To do with oil leak. GM sources parts from 1,000's of vendors and as with anything mass produced, flaws are unavoidable.    Putting a larger oil filter will do nothing but satisfy emotions. The OEM filter is designed for the engine and perfectly capable of handling the demands on the engine. Oversize oil filter could result in reduced flow and overall lower oil pressure.
    • You're better read than that Atlas. 😏   British science fiction writer Arthur C. Clarke formulated three adages that are known as Clarke's three laws, of which the third law – that "any sufficiently advanced technology is indistinguishable from magic" – is the best known and most widely cited.   Stribeck and the pivotable Hersey Number isn't voodoo nor snake oil. That part is physics. It's what marketing and bean counters do with it that is snake oil and voodoo.    Stribeck is the relationship between Hersey and the Coefficient of Friction. Within the Hersey Equation if viscosity and viscosity is 'Dependent' on.......heat.......and.......viscosity index or the temperature to viscosity slope.    Specifically Hersey is the viscosity AT THE TEMPERATURE IN THAT LOCATION FOR THAT SLOPE.   Hydrodynamic lubrication exist when the film thickness in the location is 3X the Ra roughness of the surface. This is irrespective of the hardness of the substrate. To obtain that thickness X viscosity is required for Y velocity at Z load. That's a lot of moving parts. It is also impossible to maintain in an ICE but nearly possible with a turbine under constant load.    What does that mean? Error heavy and operate light. Wear is inevitable but the rate of wear and the milage obtainable are a function of prevailing conditions and HABITS. The only penalty is viscous drag and at fractions so low as to be well worth the effort. Double the life, half the manufacturing carbon foot print. Greed is the only impediment.    The materials generated by SwRI are the RESULT not an estimation or a hypothesis.    Don't delude yourself sir, EV's have as many pitfalls as ICE's. We just don't know what they are yet and it will take longer to sort as MARKETING and GREEDY CEO's have had more time to polish the turd they are selling. 
    • You can always count on greed to prey on ignorance and stupidity.    Friend bought a 2019 Ford Flex and asked me about using Valvoline R&P 5W30 in it. Told him give the miles on it and the fact it wasn't yet using oil that it was a good plan. He uses a Valvoline quick change shop for his oil service.   First they tell him that isn't the oil the OEM recommends. He told them he didn't care what the OEM thought. Then they floated the, "But it will void your warranty"    His reply was it's a 2019, there is no warranty and informed them their knowledge of the law was lacking.    Then they tell him 'But it will ruin your motor"!.    Mine to ruin he says. Finally they give in and charge him 150% the semi-syn price    Point it the brainwash is so embedded that even the service industry is drunk on their swill. The public is right behind them. Echoing the same lies on every forum and media platform. If the end goal is indeed EV then I'd say that ship is about built. 
    • Diesel hit $6.00 here today at the truck stop.   Payed $2.79 for E85 today too.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...