Jump to content

1994 4l60e Binds On Shift After Rebuild


teddybeartruck

Recommended Posts

Posted

I rebuilt my transmission following steps carefully. Re-installed, filled trans, than with engine running in park checked fluid level and continued to fill. currently over full. Will drain some before next check.

Idling in park (or Neutral) shift into gear and the trans locks up and kills the engine with a slam.

What is the first thing I need to look into? All shalfs rotated during each step of rebuild and install.

Teddybear

Posted

Sounds like you have one of the valvebody bolts in the worng place. There is one VERY critical bolt that is longer and will pertrude into trans and lock it down.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...