Pin out, Camera connector 2011 Silverado 1500 LTZ

[Sox Fan]

Sure anytime, glad to help out. Good luck with your install !!

[Zebrafive]

Try this adaptor, think this is what we both need. Its the female connector. https://camera-source.com/products/wiring-kits/2009-2013-silverado-sierra-mirror-add-cam-adaptor-without-power-rear-window

 

If your installer "T"ed into the white and blue wires to your mirror under the overhead console, this adapter plus an RCA cable to the RCA connector on X4 should allow you to back feed/split the video signal to your navigation unit and the mirror. If the installer cut the white and blue wires and spliced to the side going to the mirror you will have to splice the ends that go to X208 back to the camera feeds to be able to use the adapter and a RCA cable to get video to the navigation unit. You could cut the side to the mirror if you do not want to feed the mirror AND the navigation unit.

When the camera was installed I had not planned on putting in the factory NAV. I found a great deal on a used unit so its a new upgrade.

Yes, the wires were spliced at the mirror, up underneath the front overhead console. Think it was pin 6 and 7 in the mirror harness.

First Installer must not have known about X208 or did not have the adapter to connect there.