Jump to content

Current Silverado 1500 Incentives


Recommended Posts

Posted

Hello:

New to the forum. I'm in the market for a new Silverado 1500 Double Cab, 5.3L LT w/ Allstar Package 4x4.

 

I live in NW Pennsylvania....I thought it would be more straight forward, but trying to figure out what incentives are out there right now:

 

Chevy Website shows: $2250

 

Gm Card Webiste shows: $3250

 

(https://www.gmcard.com/grid-data?region=northeast)

 

I called Simmons Rockwell, a large dealer in souther NY, and they tell me $3250 in National Rebates that everyone will qualify for.

 

I called a 2nd dealer in Erie, PA, they told be $7000 in rebates including a $2000 credit union rebate?

 

Can anyone give me the straight story on what rebates there are right now for NW PA?

 

Also, I don't absolutley need to buy now if waiting a few months would get me a better deal...

 

Any advice on what time of year is the best time to buy a Silverado 1500?

 

Sorry for the long post...

Thanks for any input.

 

 

Posted

Whenever Silverado sale velocity is down is the best time to buy (hard to predict), other than that maybe December. Right now is a pretty good time to buy, at least in my area. I got 18% off MSRP without any haggling on LTZ Z71.

Posted

I say 10-12k off sticker and you're doing ok.

Posted

Get a crew cab. Do it right the first time. GL. There are good deals out there

Posted

I got an email last night for 13k off 2015 CC.

Posted

i just went in and looked at silverados before I decided on the Sierra. There are about 5k in incentives that anybody can get and then make sure you get supplier pricing (credit union; join one for $50). Also there's another 1500 if you finance with gmac wells or ally

 

Whenever Silverado sale velocity is down is the best time to buy (hard to predict), other than that maybe December. Right now is a pretty good time to buy, at least in my area. I got 18% off MSRP without any haggling on LTZ Z71.

I got the same 18% on my slt
Posted

What incentives are the dealers offering to get $10-13k off? I have GMS pricing and can only get $9400 off with all incentives . What are the dealers hiding?

Posted

Probably trade in discounts and credit union.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined
  • Who's Online   1 Member, 0 Anonymous, 216 Guests (See full list)

  • Latest Articles

  • Posts

    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...