Jump to content

Recommended Posts

Posted

I am also having the same issues as most on here. Did anyone ever find out the real reason and fix to the issue without buying a programmer?

  • 1 month later...
Posted

I have a 2015 silverado 5.3 4WD. I've added AFE intake, AFE exhaust, Edge throttle booster, and the edge handheld programmer. Also about to hit 120k on miles. The way my truck acted its making me think fuel system. Same studder, hesitation you all describe. My truck is at a local shop. Tomorrow morning they start on it. Hoping to know something soon. I'm thinking one of the two fuel pumps. Maybe a filter? Also I'm probably going to have the plugs, wires, and maybe coil replaced. Once I know more I will bring back what I learn.

  • 4 weeks later...
Posted
On 11/20/2017 at 7:54 PM, Cwjames said:

A little late joining in, but I purchased a 2017 sierra 1500 in June of this year.  Amazing truck!  It took a week or two to really tune into an issue similar to all of yours.  The morning drive to work was great, and generally the evening drive as well.  Though the days there were lunch errands to run, I noticed this funny hesitation, it drove like my old '89 on a rainy day!  Tuning into this, I pushed the issue and would unnecessarily drive the truck at random times. (This is summertime in northern Michigan temps).  I had pinned it down to any startup 3-7 hrs after a full temp drive.  Any sooner, all was fine, any later, no issue.  Once fully warmed up, I have no issue.  It's an odd, partially cooled engine issue, only happening at low rpm.  Slow acceleration through the parking lot and onto the road.  I could push through it by stomping on the accelerator, but it just makes for nonsense, uncomfortable accelerations.  I have watched the dash for the v4-v8 shift, there is no correlation.  Never happens at speed, like on the highway in some reports.  I also tow boats and campers with no issues once warm.

 

I took it it to the dealer, they could not reproduce, of course, and did a system update in hopes of fixing the problem, claiming the transmission needed to learn my driving habits.  No fix!

 

Back two more times, they claim it's an emissions regulation that I cannot get around, and the Colorado's are worse.  Bunch of BS.  Supper happy with the truck in all other aspects, but this is annoying!

 

I have parked the truck for the winter, don't want the tons of salt dumped on our winter roads to eat the body up, so nothing to report on cold weather conditions.

 

Just plain frustrating!

Have you found a solution for it? I am having the EXACT symptoms.

  • 1 month later...
Posted (edited)

I have a 2017 Suburban with the 5.3L and have been having the same hesitation and stuttering up hills or under constant load described in this post.  I thought it might be the AFM system so I purchased an S1000 AFM disabler from Diablo sports.  It is easy to install, you just plug it into the OBDII port and you are good to go.  Since installing it my problems have gone away.  I was originally skeptical that it would help but having read this post and a few others I was at a loss and did not really like driving the vehicle so I figured it was worth the $200 to try it.  It now drives like it should and is way more responsive accelerating after a brief time of light load operation.

Edited by Rustin
  • 2 months later...
Posted
On 6/22/2020 at 9:48 AM, Rustin said:

I have a 2017 Suburban with the 5.3L and have been having the same hesitation and stuttering up hills or under constant load described in this post.  I thought it might be the AFM system so I purchased an S1000 AFM disabler from Diablo sports.  It is easy to install, you just plug it into the OBDII port and you are good to go.  Since installing it my problems have gone away.  I was originally skeptical that it would help but having read this post and a few others I was at a loss and did not really like driving the vehicle so I figured it was worth the $200 to try it.  It now drives like it should and is way more responsive accelerating after a brief time of light load operation.

I have a 2014 5.3L Silverado that is doing the same thing as everyone else is experiencing.  I changed the plugs,  I ran 2 bottles of injector cleaner, ran premium in it and I purchased the Diablo S1000 AFM disabler.  Still no fix and throws no codes.  Happens between 1500-1700 RPM.  

  • 6 months later...
Posted
On 9/3/2020 at 11:47 AM, D Gilkey said:

I have a 2014 5.3L Silverado that is doing the same thing as everyone else is experiencing.  I changed the plugs,  I ran 2 bottles of injector cleaner, ran premium in it and I purchased the Diablo S1000 AFM disabler.  Still no fix and throws no codes.  Happens between 1500-1700 RPM.  

 

Posted

Same here. I’ve replaced the intake, injectors, both fuel pumps, all sensors coils wires plugs 

I’m out of ideas.  Paid dealer $300 to diagnose and nothing.  Anybody able to fix this issue?

  • 5 months later...
Posted

I have a 2016 Silverado Z71 Texas Edition! Same issue and it’s completely annoying! I’ve put new plugs wires etc it seems as if it’s not getting fuel when it needs to! Chevrolet needs to push a recall for this issue

  • 2 weeks later...
Posted

So after a month in the shop they replaced cam shaft position sensor and that wasn’t it. I’m pretty sure I knew what the issue is but waited for dealer to tell me first. And now my worst nightmares come true. If you’re still feeling that jerking and surging your issue is probably the same, unfortunately guys it’s a misfire caused by bad lifters. If your feeling like your truck keeps hesitating or riding over tiny bumps, surging or jerking it’s the beginning of engine failure .You need to get it in the shop before it gets worse or you could potentially destroy engine. But the bad news gets even worse Gm has so many lifter failures they can’t get the parts stocked quick enough to fix even a small portion of trucks so the wait time for lifters, rails and guides is roughly 6 weeks plus. Still yet it gets even worse I asked the technician at the dealer if this is a permanent fix or just a band aid until next lifter failure and he did not wish to answer that question which tells me it’s not a permanent fix. Even if you get it fixed your truck could fail again at any time. What a piece of crap Chevy has unloaded on the public my dealer alone has 5 truck in front of me with same issue. If you average out the number of trucks Chevy sells per year (approx. 500,0000) divide it by dealers in united states (approx. 4500) that's 10 trucks sold per month per dealer. My dealer has 6 failures this month alone. So let’s give Chevy the benefit of a doubt and say its only 3 truck out of ten that are bad although the real number is much higher. Then Chevy is experiencing 172,800 vehicles per year have engine failure of this type and there not recalling they are just going to continue to pass of this defective vehicle as ok to the consumer. I think its time everyone who bought these $50000 paper weights to start complaining to GM or we may get stuck with these trucks. GM customer service number is 1-800-222-1020 my dealer says to call them and I think we should complain until their ears bleed. Please everyone do yourselves a favor and light up their customer service phones otherwise Chevy will let us take a loss

Posted
15 hours ago, sfargo said:

So after a month in the shop they replaced cam shaft position sensor and that wasn’t it. I’m pretty sure I knew what the issue is but waited for dealer to tell me first. And now my worst nightmares come true. If you’re still feeling that jerking and surging your issue is probably the same, unfortunately guys it’s a misfire caused by bad lifters. If your feeling like your truck keeps hesitating or riding over tiny bumps, surging or jerking it’s the beginning of engine failure .You need to get it in the shop before it gets worse or you could potentially destroy engine. But the bad news gets even worse Gm has so many lifter failures they can’t get the parts stocked quick enough to fix even a small portion of trucks so the wait time for lifters, rails and guides is roughly 6 weeks plus. Still yet it gets even worse I asked the technician at the dealer if this is a permanent fix or just a band aid until next lifter failure and he did not wish to answer that question which tells me it’s not a permanent fix. Even if you get it fixed your truck could fail again at any time. What a piece of crap Chevy has unloaded on the public my dealer alone has 5 truck in front of me with same issue. If you average out the number of trucks Chevy sells per year (approx. 500,0000) divide it by dealers in united states (approx. 4500) that's 10 trucks sold per month per dealer. My dealer has 6 failures this month alone. So let’s give Chevy the benefit of a doubt and say its only 3 truck out of ten that are bad although the real number is much higher. Then Chevy is experiencing 172,800 vehicles per year have engine failure of this type and there not recalling they are just going to continue to pass of this defective vehicle as ok to the consumer. I think its time everyone who bought these $50000 paper weights to start complaining to GM or we may get stuck with these trucks. GM customer service number is 1-800-222-1020 my dealer says to call them and I think we should complain until their ears bleed. Please everyone do yourselves a favor and light up their customer service phones otherwise Chevy will let us take a loss

 

 

Posted

Agreed,I've thrown over 3k changing plugs,wires,rear end replacement,trying to fix this hesitation.a friend of mine replaced throttle app sensor in gas pedal and he says this helps

 

  • 9 months later...
Posted

Here is the answer to your problem. Your problem is the ignition coils, spark plug wires, and spark plugs. I was experiencing the same problem with my 2011 Chevy Silverado LS 1500 5.3. I replaced the ignition coils, not with after-market coils (AC Delco) and the same brand for the spark plug wires and plugs. The truck runs just like it came off the showroom floor. I know that it is frustrating, but you can thank me later!

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   1 Member, 0 Anonymous, 2,793 Guests (See full list)


  • Latest Articles

  • Posts

    • So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...