Jump to content

2014 Silverado front parking sensor bracket

josed_1017

By josed_1017
in Modifications & Accessories

Recommended Posts

josed_1017 New Member

josed_1017

Posted
Posted

I recently did an upgrade on my 2014 Silverado LT by adding a front bumper with the parking sensor holes. I have the sensors for it but not the brackets that they sit in. I have looked for them online by the part number 22774448 and have had no luck finding them. Just about everywhere I looked they seem discontinued. Any clue where I might be able to find them besides the dealership ? Is there another part number I can find them with ? Do the ones off the HD or Sierra fit ? Any help will be greatly appreciated! ?

hackitz Enthusiast

hackitz

Posted
Posted

Pretty sure it is, you could order one. If it fits then order all of them. If not return it.

Sent from my S10 using my thumbs, with tapatalk.

Donstar Senior Enthusiast

Donstar

Posted
Posted
12 hours ago, josed_1017 said:

I recently did an upgrade on my 2014 Silverado LT by adding a front bumper with the parking sensor holes. I have the se nsors for it 

Are these aftermarket sensors with a dedicated display or will these somehow be integrated into your DIC?  Just curious and have thought of doing the same.  However, I was looking at kits at Best Buy and thinking of drilling the holes in my bumper. Did you replace your bumper just for the sensor holes or was there damage?

  • 2 months later...
Rock1500 Senior Enthusiast

Rock1500

Posted
Posted
On 11/7/2019 at 8:31 PM, josed_1017 said:

I recently did an upgrade on my 2014 Silverado LT by adding a front bumper with the parking sensor holes. I have the sensors for it but not the brackets that they sit in. I have looked for them online by the part number 22774448 and have had no luck finding them. Just about everywhere I looked they seem discontinued. Any clue where I might be able to find them besides the dealership ? Is there another part number I can find them with ? Do the ones off the HD or Sierra fit ? Any help will be greatly appreciated! ?

How were you able to integrate the sensors for the front bumper?   I have a 2014 bumper and I would like to do the same if possible.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined

  • Who's Online   4 Members, 0 Anonymous, 415 Guests (See full list)

  • Latest Articles

  • Posts

    • Core-Lokt
      Wiring Help, Please

      By Core-Lokt · Posted

      Thanks; I looked there a few minutes, and I think I can find something. I really never looked there, as I thought it was stuff like PTO/aftermarket bodies/accessories like snow plows.
    • newdude
      2 speed transfer case optional now?

      By newdude · Posted

      This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • newdude
      Different requirements for oil filters?

      By newdude · Posted

      2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Grumpy Bear
      Different requirements for oil filters?

      By Grumpy Bear · Posted

      Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Coastie05
      give me some tips to make my truck look better

      By Coastie05 · Posted

      Go back to OEM wheels. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...