Jump to content

extended warranty


Recommended Posts

Posted

i am wanting to get some info on extended warranties, especially gmpp. my '01 HD has just passed 30k and that extra 6k will pass by soon so i need to get on the ball with this and figure out which one i want to go with. i have found a dealer that sells the gmpp, but the funny thing was that the finance guy didn't mention the gmpp until i pressed him on it. he gave me a round figure of about $1800 up to 75k miles with nothing in writing. i am also interested in what they don't cover. i figure that they would cover the tranny, but will they also cover the clutch? and what about the motor? mine's an 8.1. will the warranty cover it all and everything under the hood? are there any normal mods that might cause me problems with the dealer.

 

also can i haggle this price down with cash in hand or is the price set in stone?

Posted

The only one I would consider is GMPP. The other ones can be troublesome, go out of business, and you generally have to fight tooth and nail to get them to pay what is in their contract. I've had to fight for customers as well as threaten legal action myself with Honorgaurd just to get them to cover what was covered in their contract.

 

I only recommend manufacturer backed extended warranties. They may cost a little more, but there is no where near the headaches dealing with them.

Posted

Philmo,

 

Give Blake Huddleston a call at 1-800-259-1200. He is in the finance department at Classic Chevrolet. I purchased my GMPP through him. He is a great guy to deal with. He can give you all the information you need and set you up with a policy for a good price.

 

Hope this is helpful, Joe

Posted
Philmo,

 

Give Blake Huddleston a call at 1-800-259-1200.  He is in the finance department at Classic Chevrolet.  I purchased my GMPP through him.  He is a great guy to deal with.  He can give you all the information you need and set you up with a policy for a good price.

 

Hope this is helpful, Joe

thanks for that info. i called blake and had a great talk about all sorts of truck stuff. nice guy. he is sending me all the info and a contract today and i will look it over and more than likely go ahead a get it. for my particular truck he quoted me $1,065 for a 3 year, 36,000 mile deal with a $100 deductible.

Posted

I have definately used my GMPP. I got the 5/75,000 mile plan with $0 deductible for $1400. I now have 64,500 miles and have had the following fixed after 36K miles.

 

1. fuel regulator replaced

2. Driver side power window assembly replaced

3. Front axle seal replaced

4. Both heated mirrors replaced

5. HVAC control assembly replaced (two lights were burned out)

6. Fuel sending unit replaced in the tank

7. New resistor for blower speed #1

Posted

Did that 5yr 75K mile start AFTER the 3yr 36K "original" ended so you would get like 8yrs and 110K+ miles or basically tack on another 2yrs and 40K miles on to the original?

 

Thanks

Posted

I had GM Majorguard on my used 92 Jimmy and used it with no real problems. I went with a AAA warranty on the Rado and it's worked out well so far. I wouldn't have gone with anyone outside of those 2 though.

Posted

The 5yr/75000 warranty is just and extension of the base 3yr/36000 warranty. So you are just adding an additional 2yr/39000 miles to the base warranty. I wish it worked the other way around. I got the extended warranty through the dealer when I purchased my truck. I think it was around the $1600 mark. I am well into it with almost 47000 miles on my truck. I am hoping for no problems, but I understand that if something happens the warranty will more than pay for itself. :jester:

  • 3 months later...
Posted

Just out of curiosity - can anybody call Blake ?? Call me an idiot - but my wife's 02 Trailblazer is getting real close to 36k (34.9) and I really dont like any of the dealer close to me.

 

She still hasen't decided if she wants a new Tahoe yet...so we might just be buying the extended warranty for now.

 

Also - any ideas what 5yr 75k GMPP should cost for 02 Trailblazer LT ??

 

Thanks

Posted

I bought my 01 2500HD at a Ford dealership because I didn't care for any of the Chevy dealerships in the area. I got her last June with 18800 miles on her. When I got her I decided to get the extended warrenty through Ford. I ended up getting a 75000/5year deal for $1500. I am at 26870 miles now and I will be taking her in sometime in the next 2 weeks because I have a couple of things that I need to get replaced.

 

mike

Posted

I went through API from the dealership. The give you a pro-rated dollar amount back if you don't use it, and the full shot back if you don't use it and take it to the end of the term purchased. For instance I paid around 12 or 1300 for it. It was a 6yr 100,000 mile warranty covering almost everything except wear items. If I had taken it to the 6yr or 100,000 and remembered to send them a letter withing 30 days, the full amount returned to me. As it was I traded the truck in at 42,000 miles and am recieving 6hundred something back. I thought it should have been more but at least it's something to put toward the next one if I decide to go that way. Never heard of getting moneyt back before. Will probably go that way again.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined
  • Who's Online   1 Member, 0 Anonymous, 273 Guests (See full list)

  • Latest Articles

  • Posts

    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...