Jump to content

2023 AT4X not listed in GM Order Guide

n8huntsman
 Share

Recommended Posts

n8huntsman Enthusiast

n8huntsman

Posted
Posted (edited)

I use the GM order guide quite a bit to see the differences between models and trims. Wanted to see if there were any plans to add Super Cruise to the Sierra AT4 for 2023 and noticed that the AT4X (4SG) is not listed like it is for 2022. ZR2 Silverado is shown for both years. Any thoughts on why this is? I have found the guide to very accurate and up to date on what is and will be available.

2022 - https://www.gmfleetorderguide.com/N...vehicleID=22364&section=oi_def&page=6&butID=3

2023 - https://www.gmfleetorderguide.com/N...vehicleID=22449&section=oi_def&page=1&butID=3

Edited by n8huntsman
newdude Senior Enthusiast

newdude

Posted
Posted (edited)

Could be missing due to an upcoming product change to that trim that hasn't been announced.  There has been a GMC AT4X with ZR2 style high clearance bumper spotted in camo.  

 

Also, the trim RPO is just 4SG.  The 6 is just the footnote marker.  

Edited by newdude
n8huntsman Enthusiast

n8huntsman

Posted
  • Author
Posted (edited)

I saw that high clearance bumper. Looks promising. Hopefully it gets added for 2023. Think Super Cruise is too much to hope for? I know it's an off-road truck but realistically you know they see more freeway than dirt.

Edited by n8huntsman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      VSE CCV Bypass - Anyone have this installed in their L5P?

      By asilverblazer · Posted

      Maybe.   Maybe.   I don't want to be the one that needs help and can't get it when I need it. That is a legitimate complaint, and how they respond to those legitimate complaints is a big red flag to me.   I don't care how good the product is their conduct is subpar. Some people are fine supporting that for the sake of getting the product they want. I'm not.   To be fair, I haven't seen or touched their product in person to determine for myself the quality of it. I'm not offering any opinion on that either.
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      So if you do nothing and they act on their threats like death to America or Israel. And possibly a nuclear war. Whoever survives wonders why didn’t they listen? Or we do something like every President has said they can’t get a nuclear weapon. We’re at the 10 yard line and it happens the time is now or never. I think I’m ok with paying a little more for gas for awhile. It’s a shame that we now live in a world that’s so polarized. 
    • newdude
      6 Speed vs 8 Speed

      By newdude · Posted

      4-5-6 fails due to design.  Not enough clutches and not enough piston to clutch surface area.  Also the backing plate can bow.     I'd say converter is two part.  The design of converter chosen, and factory tuning of it aka slipping it in D (also L6) for AFM purposes, as well as locking it up in 2nd gear, sometimes 1st, also it will partially lock up at light loads.  All because CAFE/fuel economy requirements.  A billet converter on the stock tune might hold up better, but would still be subject to the stock tuning and how its designed to lock or partially lock.     The most baffling part to me, is the 2007-2013 6L80s didn't have the failure rate the 2014-2018 ones do.  I've been where I work for almost 17 years now, and I recall maybe 3 or 4 of the 07-13 transmissions getting pulled for something.  14-18 on the other hand, it was at a minimum one a month being opened up.    If I had to guess, I'd say the tuning for the gen 5 engines/6L80 setup and its fuel economy goals had a good bit to do with it.  Also, it was bankruptcy time during these years, so I'm thinking some cost cutting was done for the launch of the K2XX trucks.  See also now the 10 speed valve body issues (more cost cutting).  They blow out some mesh screen in the spacer plate, undersized check ball, and the feed limit valve was aluminum and wears out prematurely.         I don't think it was the HP jump from the gen 4 to gen 5?  The 6.2 in the 07-13 trucks was good for 380-400hp during its life/states of tune, and the 5.3 did 310-320hp.   
    • Atlas
      Gas Prices

      By Atlas · Posted

      All this might be worth it had we actually recovered enriched uranium, a WMD, or an actual nuclear deal with oversight. This is a flub of epic proportion, and they all know it.   $5.10 at a station reporting $4.99 last week. Here we go....
    • Silverado4x4
      Gas Prices

      By Silverado4x4 · Posted

      👍

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...