Jump to content

2014 l83 Sierra

Bettywhite

By Bettywhite
in Ask A GM Technician

 Share

Recommended Posts

Bettywhite New Member

Bettywhite

Posted
Posted

So first thing I changed spark plugs and then everything went wrong started misfiring on 4 and 6. That's the beginning 3 months nothing but problem after problem. Cat went bad replace the whole y pipe. Then lifter went on 6 pulled everything all new lifters and pushrods 4 new fuel injectors. Fixed okay now lifter went bad on 4 pulled everything replaced all lifter and push rods again got everything back together and now misfiring on 6. Afm is disabled but not deleted. What to do its been 2 or 3 times now within 3 months 

 

Jsdirt Senior Enthusiast

Jsdirt

Posted
Posted (edited)

If it were mine, I'd be buying a new crate engine from a builder (NOT GM) without AFM (if that's possible on these newer ones), then have it dyno tuned. Either junk parts, or something got screwed up in the block, sounds like.

 

But before going scorched earth on that, check and make sure it's not something as simple as a cracked spark plug, carbon tracking, or a bad coil, or a failed injector or wiring. A compression and leakdown check would be in order, too - that will tell you for sure if there's another valvetrain problem going on here. 

Edited by Jsdirt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,973
    Total Members
    8,960
    Most Online
    RichardRS
    Newest Member
    RichardRS
    Joined

  • Who's Online   1 Member, 0 Anonymous, 657 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      Well that book won't sell many copies. Taking ones right foot off the loud pedal never gets applause. Funny really, It isn't that people don't know what to do...they just don't want to do it. But they will complain about it. About bad craftsmanship, about the cost of fuel, about the cost of part and repairs and mainly they complain that the solution while still possible isn't one they are willing to do.    I observe this daily. 'Gas cost to much!", they wail, while they mat it passing at 80+ mpg and scoot down the road like gas cost a dime a gallon. Then complain about the few that will lift and save both fuel and iron like they are owed and own the road.    Good thing they haven't an ounce of influence on my equipment. The rest I just laugh at. Stupid is as stupid does, right Forest?     
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Today I filled up with 4.899 gallons of fuel at a cost of $4.899 a gallon. $24 bucks. 290 miles. 59.2 mpg. After my 4% COSTCO discount just under eight cents a mile.  
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • TrueBlue
      Brake Pad Warning Message

      By TrueBlue · Posted

      I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • SwitchBladeSierra
      Heated steering wheel

      By SwitchBladeSierra · Posted

      I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...