Jump to content

Sirius indoors


Recommended Posts

Posted

I want to know peoples experiences with Sirius inthe home or office. I want satellite at work. I like Sirius but dont know how well or even if it will work at my office. Few guys have XM and it works flawless. I dug around on Sirius Backstage forums and saw many have issues with Sirius indoors unless the antenna was put right in a window. That said, who here has good luck with Sirius in their office or house withouth the antenna on the roof or in a window? I found a good deal on an XM boombox at best buy last night for 100 bucks out the door. It wasnt a Delphi boombox or anything. It is a boombox that has an XM unit built into it along with an MP3/CD player.

Posted

I know this won't help any but I have my XM antenna in between my window & the screen on the sill, in my office, and it works great....theoretically, as long as you are in view of the satellite.....you should get a signal.

Posted
I know this won't help any but I have my XM antenna in between my window & the screen on the sill, in my office, and it works great....theoretically, as long as you are in view of the satellite.....you should get a signal.

 

 

 

 

Yea. The guys I work somewhat close to just have their antennas pointing to the south wall and it works great. I may just get the XM bowtie boombox and call it good.

Posted

I have a Sirius receiver in my house without having the antenna in or near a window with perfect reception, BUT there is a Sirius terrestrial repeater in my area. I tried using the same receiver/antenna in my office with no luck.

 

I believe that the XM infrustructure includes many more terrestrial repeaters than Sirius which is why you'd hear more people having good luck with XM indoors.

 

Sirius does offer internet streaming but the sound quality is just not the same as the real thing. Even with that said, I'd prefer lowered quality Sirius to XM any day. Sirius' content is by far superior.

Posted

One other thing to note, if you have tinted windows between the antennae and the sky, they will block the signal. Found that out when we put window film on the south facing house windows...

Posted

Well. Im guessing the Sirius isnt gonna work then. Would yall say that?? I dont know why but I bought a Sirius boombox on eBay last night. Im pissed now. :thumbs:

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Very interesting thread. Definitely didn’t expect to see this kind of mileage out of that engine. 
    • Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Definitely needs to go back to the dealer. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...