Forged pistons/billet rods (NOT FOR LS MOTORS)

[Roadrage97]

I am reposting this to clear up some confusion. I currently DO NOT have a crank for this kit. I am including a brand new crank that will be ordered to the purchasers specs. The reason the old crank is not included is because I do not trust a mallory weight that was installed in the balancing. A pic can be seen here.

 

The price of $850 is for an Eagle cast crank with a 3.75" stroke. A forged piece can be substituted for an EXTRA $400 (total of $1250). The eagle cranks will not hold up shipping, both cranks are in stock at a friends shop,so no fear on waiting is necessary.

I will also sell without a crank for 650 shipped.

That being said, here is the original post:

 

Pics of pistons/rods/rings here.

I have a set (8) of Wiseco pistons and 6" protech billet steel i beam rods. Complete with speedpro rings and ARP bolts.

 

Were used for less than 1000 miles, nothing wrong with them

 

These are SBC/LT1 parts, not LS1

 

 

Wiseco pro tru forged pistons

#5009H3

Bore size: 4.030

Stroke:3.750

Rod length:6.0

Comp Hgt:1.125

Dome volume:-20cc

Comp ratio w/67cc head 9.2:1

 

 

Brand new Eagle cast crank (can be replaced with a forged piece for an additional $400 )

 

$850 shipped with the cast crank, 1250 with the forged.

 

[Roadrage97]

Bump

[Roadrage97]

Can also include a cast Eagle crank for an additional 200, or a forged 4340 crank for an additional 600.

[Roadrage97]

TTT

[Roadrage97]

bump

[Roadrage97]

Pics and details added.

[Roadrage97]

TTT again

[Roadrage97]

And once again, TTT.