Jump to content

Turn Signal Mirrors

adriangunz

By adriangunz
in Audio, Electronics & Software

Recommended Posts

adriangunz Enthusiast

adriangunz

Posted
Posted

Whats going on fellow CHEVY enthusiasts? After researching topics on the possibility of an upgrade to mirrors with the integrated turn signal, I have come to the conclusion that it can be done and with relative ease(at least it seems that way! :jester: ) I have a 2006 Chevrolet Silverado Crew Cab Z71. This truck came with the power heated mirror option, but lacked the integrated turn signals. I purchased some mirrors that are power heated and have the turn signal which came off a 2004 Silverado 2500 Series. It seems like they just plug in. But, according to my local Chevy dealership parts guy, it can't be done. AT ALL. A lot of you fellow members have said that you were told the same by dealerships, that something like this upgrade or an upgrade to a steering wheel with audio controls and DIC could not be done as well. Siding with the members I bought the mirrors and am going to put them on within the next couple of days, hopefully before Christmas. I'll let you guys know if it does work or if the stupid parts guy was right. :lol:

05Quadrasteer Enthusiast

05Quadrasteer

Posted
Posted

Google Muth Mirrors, they are a company that specializes in turn signal mirrors. They also have the directions on how to install them. Might be able to find the information you need there.

 

Have a nice day.

 

Bill

adriangunz Enthusiast

adriangunz

Posted
  • Author
Posted
Whats going on fellow CHEVY enthusiasts? After researching topics on the possibility of an upgrade to mirrors with the integrated turn signal, I have come to the conclusion that it can be done and with relative ease(at least it seems that way! :lol: ) I have a 2006 Chevrolet Silverado Crew Cab Z71. This truck came with the power heated mirror option, but lacked the integrated turn signals. I purchased some mirrors that are power heated and have the turn signal which came off a 2004 Silverado 2500 Series. It seems like they just plug in. But, according to my local Chevy dealership parts guy, it can't be done. AT ALL. A lot of you fellow members have said that you were told the same by dealerships, that something like this upgrade or an upgrade to a steering wheel with audio controls and DIC could not be done as well. Siding with the members I bought the mirrors and am going to put them on within the next couple of days, hopefully before Christmas. I'll let you guys know if it does work or if the stupid parts guy was right. :cheers:

 

MISSION ACCOMPLISHED!!!!!!!! :D

I was able to install the mirrors no problem. My truck had the correct switch and all I had to do was plug it in. On my switch there were three plug-ins, one was labeled black, the other blue and the last one green. My original passenger mirror(power/heated) had only one plug, blue. The driver side mirror and had two plugs, black and blue. The new mirrors I bought(power/heated/turn signal) both had two plugs, black and blue. I plugged them up to their corresponding colors and VOILA! THEY WORKED. I'm thinking the other plug-in(green) is for the power folding mirrors, just a guess though. So the mirrors do just plug in. But like the parts guy said, you have to have the right switch. Maybe they all come prewired. I don't see why they would put switches that have this capability in some trucks and not others, seems like that would be a waste of money for GM and not very efficient. I guess if any other people want to do the upgrade, the first thing to do would be to check if you have the correct switch. And go from there. If you can't do it, the next best thing would be to get the MUTH mirrors, which come with the turn signal and heated if you want. You just have to splice into the line to draw power. Hope this post was of some help! :D

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Deadwood
      primary drive belt tensioner

      By Deadwood · Posted

      I bought belts and pulleys for my '20 L5P at Rock Auto a couple years ago. I have used them for many years, and almost always save significant money, especially when I buy maintenance stuff ahead of time.   They carry many OEM parts, which is all I use unless an aftermarket is shown to be same/superior, or if it is an insignificant part or unavailable OEM part anywhere else. RA is usually lower priced, often by a bunch, but parts are sometimes unavailable or out of stock, and I do shop around and sometimes find better prices at other sites.   Be aware that you pay shipping, and if you buy multiple items and they are coming from different warehouses, the shipping can kill the advantage. Planning ahead is best if possible.   If you have a transmission service in the near future, check out their OEM (AC Delco ULV) fluid, usually MUCH less than anywhere else.
    • Deadwood
      10L1000 anyone with High Mileage ? I hate Damocles....

      By Deadwood · Posted

      New member here, very long time occasional guest. Saw this thread, thought it would be a good time to contribute someting. It is only my experience and not a claim that everyone will have the same.   I bought my '20 3500 L5P new and have put 99.9% (literally) of it's current ~400k miles on it myself, with over 50% of that towing loads between 4k to 15k, and to me this truck has been nothing short of amazing. For the first 235k I had zero issues, and from there until 321k I replaced a NOx sensor, two failing glow plugs, and three of the notorious injector connectors. I believe this truck is in part, a testament to good luck, but also good care and following a decent maintenance schedule (I also keep meticulous records.) As a result, it looks as good as a well cared for 70k rig, up and down, inside and out.   At some point before that 321k mile mark I began to get a little spooked about the 10L1000, especially the valve body. Word of mouth about potential issues prompted me to jump on the net to sift through all the noise and determine what all the fuss was about. I routinely take long trips, coast-to-coast and points in between, so roadside breakdowns can be '...a thousand miles from nowhere' and a bit of a challenge, and though I had no issues, my guard was up and activated.   And then I stumbled across a chance to salvage some parts off a new 2025 that had been wrecked in transport. I grabbed a few wear items (alternator, pulleys, etc.) and on a whim asked what the ten speeder would cost me. It was cheap...really cheap. I knew some changes had been made in the '24+ version 10L and were supposedly not compatible, but I called service/parts at my local Chevy dealer and asked why and they didn't know. A call to a well known aftermarket transmission outfit revealed it was very likely it would be fine, but to them not 100% sure.   Because it was cheap (really cheap) and I was spooked, I took the chance. Had it installed by a local shop and it worked like a champ, shifted just like the original. At it's first service at 37k, I had the shop put in a Next Gen valve body kit, which after some initial hiccups and rough shifts, smoothed out though with somewhat firmer shifting.   All that said, I have a very serious concern about my newer transmission as just two weeks ago it suddenly began to exhibit a strong reluctance to engage forward or reverse. It was a bit past due anyway so I took it in for service. The reason it was sticking was due to 'glitter' in the fluid clogging the filter...not good folks, often indicates a converter giving out. We ended up going ahead with the new filter and fluid, first to see if it would move and shift, and then if so buy me a little time. It did, and I've driven it over a thousand miles and it is shifting smooth, no noises or slipping. Regardless, it looks like a third gearbox is in my future so I can resume taking long trips with some confidence. In the very short term, my curiosity will have me examining the fluid to check how much glitter has reappeared.   An earlier poster had alleged, in the context of 10L100 failures, that it is another example of how we seasoned citizens somehow descend into hysteria, lose control of our senses, and react irrationally after brief encounters with the idiocy of the internet infosphere. Let me say (and I have used and abused said internet since it's infancy) there is no segment of the populace that has a corner on over-reaction to digital garbage. Just as my offering of experience in this arena is purely anecdotal and should not be considered gospel or all-encompassing, I believe it is still worthwhile information to consider, along with other relevant anecdotal experiences about things like complex transmissions, especially when balanced with other sources.   So to answer the original question, yes I got high miles out of my first 10L, trouble free for 321,000. Now I really wonder how much longer it would have went. Did I 'overreact' to the internet ghouls by replacing a 'good' one with a 'bad' one? Maybe. Who knows, the thing might have taken a puke a 100 miles later. So I'll just fix it again, then move on and start thinking about all the other stuff that will eventually wear out. It still has the original brakes (they're at ~60%), original injectors/pump, turbo, water pump, etc....pretty much original everything. Knock on wood.
    • swathdiver
      6 Speed vs 8 Speed

      By swathdiver · Posted

      At peak temperature.  They get to cool down and warm up more, especially those with the external cooler.  I have three GMT900s and one of them has over 225K on its original transmission.  Fluid gets changed about every 36K miles, all of it.     It's not the bean counters, it was the government.  They had to meet CAFE standards and other government requirements.   To get around that, we tune them and modify them to our liking.
    • GMCustomerService
      Will not stay in Reverse

      By GMCustomerService · Posted

      Our customers' safety isn't something we take lightly. To ensure you get the proper assistance for your truck's repairs, please fill out the form at https://s.chevy.com/support-request with all pertinent details including your username.
    • GMCustomerService
      2026 Z71 Forward and Rear Park Assist help

      By GMCustomerService · Posted

      We appreciate you sharing your experience with your truck. To ensure we get you the proper assistance, please fill out the form at https://s.chevy.com/support-request with all pertinent details including your username.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...