Jump to content

3/4 Ton Rear End Chatter


vertikal

Recommended Posts

Posted

..this truck does really well on hyway, a little stiffer than a 1500 z-71 but it's a light 3/4 ton I think..but when slowly turning to left or right (w/quadsteer off) third member binds and chatters....sorta like it may have a locker in it....maybe a bearing stuck or coming apart...? Under warranty so not going to cost anything but time away from it.....dont really think it has anything to do with quadsteer...chatters in 2 or 4 wheel steer when turning, but does fine at say 20 mph and higher speeds turning or maneuvering

Posted

It could maybe use a bottle or two/three of gm friction modifier, the clutches could be sticking, or this could be whats wrong...

 

media1-2.jpg

 

This is if it makes ALOT of racket.... :cool:

Posted
It could maybe use a bottle or two/three of gm friction modifier, the clutches could be sticking, or this could be whats wrong...

 

media1-2.jpg

 

This is if it makes ALOT of racket.... :cool:

 

thanks , friction mod is what i took it in for(an oil change) but mechs at GM said...naught....I think we'll have to keep it for a few days...doesnt make a lot of racket but is noticeable...they take it monday

Posted
It could maybe use a bottle or two/three of gm friction modifier, the clutches could be sticking, or this could be whats wrong...

 

media1-2.jpg

 

This is if it makes ALOT of racket.... :lol:

 

thanks , friction mod is what i took it in for(an oil change) but mechs at GM said...naught....I think we'll have to keep it for a few days...doesnt make a lot of racket but is noticeable...they take it monday

 

 

got it back thurs from GM...said it needed a few gaskets seals and clutches on limited slip were worn so they were replaced...GM said this is aan isolated case,clutches dont seem to go out at 49k miles huh?

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...