Jump to content

Fixing Steering Wheel Controls

MikeInCtown

By MikeInCtown
in Ask A GM Technician

Recommended Posts

MikeInCtown Enthusiast

MikeInCtown

Posted
Posted

2004 Sierra 1500 SLT with the steering wheel controls for radio and dash functions.

 

The "enter button" and the one just above it on the bottom right of the steering wheel likes to stick and doesn't click in and out like the others. I'm thinking that the previous owner may have dumped soda or something on the wheel at some point and gunked them up.

 

Is there any way to clean these out, or a spray to spray in there to clean the contacts? is there even a way to replace the sticking buttons? I have some electrical contact cleaner that I can try but I am hesitant to spray it on the bottons as i am afraid I may take some of the black coating off.

 

-Mike

MikeInCtown Enthusiast

MikeInCtown

Posted
  • Author
Posted
man just get some new buttons, they are like 13.00 and are way to easy to change out...you can get them from gmpartsdirect.com...

 

Well heck. I just figured that those buttons were like any other car problem in that the smallest dash type items are like $$$ and anything involving the steering wheel comes with all sorts of disclaimers about unplugging all the ABS fuses and giving the dealer your first born.

 

Seriously though, I can order them up then but how do you get them out?

Majorleaguebass Senior Enthusiast

Majorleaguebass

Posted
Posted

a small flat head screw driver....just pry it out and there is a little connector on there...i did mine on monday (2 buttons) and it took me all but 5 minutes and for 2 button it was like 45.00 shipped to my door...

MikeInCtown Enthusiast

MikeInCtown

Posted
  • Author
Posted

Son of a B#&^$%!!!

 

I picked up the new switch from the dealer as it was cheaper than ordering on line. Got the old switch out no problem but the GD wire was so short that the harness came unplugged before the switch was even removed. It's so short that it won't even come to level with the edge of the wheel so that you can even attempt to plug in the new switch. To top it off, I tried to pull a little with some needlenose pliers to find some slack and the GD plug broke. :dunno:

 

Anyway, how does one go about getting the wheel opened up so I can either pull the wire out some or change out the harness? What are the special precautions I need to take?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined

  • Who's Online   4 Members, 0 Anonymous, 2,202 Guests (See full list)

  • Latest Articles

  • Posts

    • B14Sierra
      Cam chain tensioner question

      By B14Sierra · Posted

      So I'm in the middle of a DOD AFM delete on my 6.2 L86 Sierra. I had a pick holding the tensioner but after I got the Cam phaser gear off I was cleaning off all the rtv and apparently I didn't have the pick seated far enough in. I bumped it and the tensioner sprang forward.  I think everything is good but I want a second opinion. The top of the tensioner is just a looped piece of plastic that rides in that channel right? There is no spring or anything is there? I got the gear and chain back on and it seems tight and everything looks right. I'm hoping nothing fell out.
    • dna9656
      No low range 4 x 4

      By dna9656 · Posted

      My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...