Jump to content

T-mobile Htc Hd2


jrrod2004

Recommended Posts

Posted

First off, I would like to give a very SHORT background story:

AT&T had gotten overly aggressive (IMO) on their billing. They tried to send me to collections on my active (and out of contract) AT&T service. Called customer service, was no where remotely satisfied and jumped ship to T-Mobile after 8 years with AT&T (First AT&T Wireless, then Cingular, then AT&T Wireless again). This "fiasco" happened yesterday morning and today I have the new HTC HD2!

 

I ordered this phone yesterday (03/25/2010) at noonish and the phone was delivered today (03/26/2010) @ 2:30 p.m. - AT&T never did that

 

Phone was fully charged in under 3 hours and this thing is loaded.

Some of the highlights: FM Radio, I-GPS, A-GPS, WiFi, 5 megapixel camera, Direct Push for Outlook, MP3 and Flash player along with minimal "crap". The only two things that I did not care for that came installed on the phone were the BlockBuster App and the stock tab. Couple of taps later and these are hidden from view.

 

Experience: I have since installed my own software on WM6.5 (Same as my Blackjack 2) but everything that I have thrown at this new phone is literally done in seconds. One app that took 8 minutes to install on the BlackJack 2 took only 1 full minute to install on the HTC HD2. This thing just moves from one thing to the next. Now if I can figure out a way to overclock the sucker :thumbs:

 

The one thing I cannot get over is the SIZE of the screen...my blackjack 2's screen looks puny compared to this thing...All the "features" that are found on an Iphone with the things that Iphone doesnt have (and I prefer): I-GPS, expansion slot, and business grade support (from our IT dept).

 

I cant find my camera to show the difference of the two phones but I will post pics once I find it.

 

By the way, the only drawback that I have seen is the screen is a fingerprint magnet, but I dont care cause it will be taken care of soon enough.

Posted

Some pics to show the difference between the Samsung A737 (Slider), the Samsung I617 (BlackJack 2) and the HTC HD2:

 

Also, at the bottom are some quick shots of the phone's browser with onscreen keypad. Just like an Iphone on the setup only alot faster on the input. Buttons are bigger thanks to the 4.3" touch screen. My phone also came with Transformers and Transformers 2 preloaded...looks very nice on the screen but I did not get any shots of that.

 

e3e426e5.jpg

 

e6a2b05f.jpg

 

7bd8270a.jpg

 

433c61bf.jpg

 

0a38270a.jpg

 

49dff365.jpg

 

4ce88c07.jpg

 

18641412.jpg

 

decd4391.jpg

 

79fcd99a.jpg

 

40def164.jpg

 

57aaa5e5.jpg

Posted

congrats, htc is decent for the most part...500 bucks for a phone is never justified though lol, they have a few bugs that need to be worked out such as weak batterys....ditch t-mobile if you can take the phone to a different network, they are rape..

Posted
congrats, htc is decent for the most part...500 bucks for a phone is never justified though lol, they have a few bugs that need to be worked out such as weak batterys....ditch t-mobile if you can take the phone to a different network, they are rape..

 

I've been with T-Mobile for quite a while now, and never had a single problem.

 

I also almost bought one of these the other day too. My G1 has been a PITA since the last update, and I'm getting tired of it anyway.

 

I'll hate to lose a couple of my apps though. The barcode scanner I have (CompareAnywhere) is kickass. It's saved me hundreds in on-the-spot scans for stuff in the last year or so. Same with the restaurant finder thingy. Uses GPS to tell me what's close. That's handy as shit.

Posted

around here they have piss poor coverage, and enjoy bumping the price on the bills with no warning...just my 2 cents either way its a nice phone

Posted
Free Barcode reader for WM: http://www.freewarepocketpc.net/get-mobile...des-reader.html

As for restaurant finders, I simply use the Google Maps App. I know that there is one app for this but I havent bothered to find it.

 

 

T mobile has rocked out thus far but I shall put them to the test in the coming weeks...

 

Awesome man!

 

I don't need it at this point (don't have the phone)...But it's good to know that it's out there :dunno:

 

/still debating on getting another smart phone or going back to a normal one.

Posted

For an AT&T "version" that is compatible with the UTMS frequency (AT&T 3G Frequency) for AT&T, the HTC HD2 model number is T9193.

But you would either have to order it here:

http://www.telstra.com.au/shop/Consumer/NG...p;top_category=

 

or find it unlocked at Ebay or another reputable site.

 

 

I would have gone this route as I have done this in the past to import phones that I liked but AT&T didnt carry and AT&T pissed me off. Rumor has it that AT&T does not carry this phone because it would be direct competition for the Iphone. Telstra uses the exact same frequencies as AT&T (USA) since the 850MHZ is the best frequency to use over long distances - which is the majority of Australia.

 

That sucks to hear that T-Mobile does that....I hope that they dont do that to me because I will cancel it, sell the phone and import this phone to AT&T (I know it sounds hyprocritical) and keep my number.

 

 

Wingnut: LOL :)

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...