Jump to content

Need Some Help Here Guys?


Recommended Posts

Posted

Okay guys im gonna install a RC 2" Leveling kit and also want to get some 3" rear blocks but my questions is.....

How much rake will that end up leaving me with? I do want a little rake becuase ill be towing a bass boat (approx. 3800lbs) but i dont want as much as stock. Im also doing this because I want more clearance for off-road situations and when these Dueler AT's give ill get a size bigger tires Also is there another quality set of blocks other than the Readylift ones, they are expensive! Any help would be greatly appreciated. I thought I had all this figured out but boy was I wrong

My truck: 2010 silverado CC Z71 4x4

Posted
Okay guys im gonna install a RC 2" Leveling kit and also want to get some 3" rear blocks but my questions is.....

How much rake will that end up leaving me with? I do want a little rake becuase ill be towing a bass boat (approx. 3800lbs) but i dont want as much as stock. Im also doing this because I want more clearance for off-road situations and when these Dueler AT's give ill get a size bigger tires Also is there another quality set of blocks other than the Readylift ones, they are expensive! Any help would be greatly appreciated. I thought I had all this figured out but boy was I wrong

My truck: 2010 silverado CC Z71 4x4

 

You say you're lifting the front 2in. and the rear 3in., right? That should leave you with roughly 1 more inch of foward lean/rake than you have now. If you don't want the rake, lift the front an in. or so more than the rear.

Posted

With that setup you will pretty much keep the truck as it is. If you raise the front 2" and then raise the rear 1.75" (you will remove factory 1.25" block and replace it with the 3" block I hope) you are pretty much right back where you started. When my truck was leveled I only saw about 1.75" of lift out of my 2" leveling kit, and there is usually about a 2" difference in the front and rear.

Posted

Here's mine with the CCM 2.5" leveling kit, and 3" rear block. There is about 1.25" of rake (40" in rear and 38.75" in front) if that helps. I do hope you know that with a 3" block in the rear, you will need new shocks more than likely. The factory shocks do not have enough down travel for adding almost 2" back there.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

IMG_0549.jpg

 

IMG_0542.jpgIMG_0547.jpg

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,938
    Total Members
    8,960
    Most Online
    C. Hart
    Newest Member
    C. Hart
    Joined
  • Who's Online   0 Members, 0 Anonymous, 413 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...