Ebcm 11-pin Interchangable With 16-pin Moduel?

[lynchmob723]

I have a 11-pin EBCM that I have determined is bad from trying on the tricks ive read here on the forum, my question is though, can I take the 11-pin out and replace it with a 16-pin module??

 

I have a 1999 Silverado, It has 3 connectors as shown in the first picture on this link (The kelsey hayes module)...However, it only has 11 pins, where as the picture in the link shows 16 pins

 

http://www.modulemaster.com/en/abs/kh325_310_30.php

[lynchmob723]

I have a 11-pin EBCM that I have determined is bad from trying on the tricks ive read here on the forum, my question is though, can I take the 11-pin out and replace it with a 16-pin module??

 

I have a 1999 Silverado, It has 3 connectors as shown in the first picture on this link (The kelsey hayes module)...However, it only has 11 pins, where as the picture in the link shows 16 pins

 

http://www.modulemaster.com/en/abs/kh325_310_30.php

 

 

So im going to answer my own question here for anyone in the future. The Kelsey hayes 325 EBCM comes in a 11 pin and 16 pin model...the difference is that the 11 pin is for non traction control, and the 16 pin is for traction control vehicles. I had to do a little calling around to figure this out