Jump to content

Recommended Posts

Posted

 

Where is this located?

Crawl under your truck by the passenger seat and look up kind of in the middle and just behind the engine bay....you should see a black hose or drip tube hanging down. Guessing 3/8" diameter. I need to figure out a way to shoot compressed air in mine.

 

 

Sent from my iPhone using Tapatalk

Posted

Bought a cheap air compressor at lunch today from Lowe's. I'm going to try to blow out my condensate line tonight after work and see what happens. I'll report back.

Posted (edited)

 

Where is this located?

I was wrong man it's behind the passenger side wheel well liner about halfway up the firewall. A black rubber nozzle sticking out and turning down 90 degrees like an elbow fitting. And I guess mine is draining fine since this is where I saw water on the frame the other day and the wheel well miner was wet....I had assumed something over flowed. I'm going to get my mechanic to shoot air up there while it's in the shop tomorrow just to be safe. I really feel like the truck used to drain more water. There were noticeably large water spots on the ground and I just don't see them anymore.

 

 

Sent from my iPhone using Tapatalk

Edited by Silverado-Hareek
  • 3 years later...
Posted

Any updated on this? Mine has been doing this starting last year, I've tried cleaning the drain and this does not seem to be the problem? Logic tells me this is bubbling from inside the heater core - because it will start to do it almost immediately on startup...

Thoughts?

Thanks

-Ryan

  • 5 years later...
Posted

My 2018 sierra Denali 6.2 does this occasionally upon initial start up. Then stops roughly two or three minutes after it’s been idling. It comes from under the truck roughly around where the transmission is. Would this be the same issue or something different? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,804
    Total Members
    8,960
    Most Online
    LCH14
    Newest Member
    LCH14
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,627 Guests (See full list)

  • Latest Articles

  • Posts

    • Yea a fluid change is in order here. Honestly, your transmission didn’t even get hot. During the summer in stop and go traffic I’ve seen my 8l80 get up to 216 and it was still shifting smoothly. 
    • I'd change the fluid and start there.   198F is nothing for the 8L90.  They typically operate 180-200F stock.  
    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
    • Atlas won.   I know better, but I did it anyway. I took a compressed air line with a chuck and rubber tip and jammed it in the open EGR port. The port was clear as far as I could see, and as far as I could poke with a flexible wire, but that doesn't mean it's not clogged.   Compressed air blew back at me along with a cloud of black. Oops. I didn't have the rubber tip seated in there all the way. Jammed it up in there some more and squeezed the chuck. PSI was set to 120. Poof! It blew back at me again. Third time...pfffffttssssssspffffffsssfffffff, face full of carbon, and then, kind of a thud..and the air stopped spraying back at me. It was now exiting the exhaust with a low shhhhhh sound as it flowed through the pipe. Something broke free. I pressurized the port again, and air flowed.   Made my day.   Long story short on this problem, it's fixed. Something was really blocking the EGR passages down low, and compressed air blew it apart. I don't recommend this as who knows what debris was sent where. But it's allowed me to move forward, mentally, and onto the next problems I need to get this little S-Blazer going down the road properly again.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...