Jump to content

Peace activists

JonesNTN

By JonesNTN
in The Off-Topic Bar

Recommended Posts

JonesNTN Enthusiast

JonesNTN

Posted
Posted

With this war, many of us will encounter "Peace Activists" who will try and convince us that we must refrain from retaliating against the ones who terrorized us all on September 11, 2001, and those who support terror.  These activists may be alone or in a gathering.....most of us don't know how to react to them. When you come upon one of these people, or one of their rallies, here are the proper rules of etiquette:

 

1. Listen politely while this person explains their views. Strike up a conversation if necessary and look very interested in their ideas. They will tell you how revenge is immoral, and that by attacking the people who did this to us, we will only bring on more violence. They will probably use many arguments, ranging from political to religious to humanitarian.

 

2. In the middle of their remarks, without any warning, punch them in the nose.

 

3. When the person gets up off of the ground, they will be very angry and they may try to hit you, so be careful.

 

4. Very quickly and calmly remind the person that violence only brings about more violence and remind them of their stand on this matter.  Tell them if they are really committed to a nonviolent approach to undeserved attacks, they will turn the other cheek and negotiate a solution. Tell them they must lead by example if they really believe what they are saying.

 

5. Most of them will think for a moment and then agree that you are correct.

 

6. As soon as they do that, hit them again. Only this time hit them much harder. Squarely in the nose.

 

7. Repeat steps 2-5 until the desired results are obtained and the idiot realizes how stupid of an argument he/she is making.

 

8. There is no difference in an individual attacking an unsuspecting victim or a group of terrorists attacking a nation of people. It is unacceptable and must be dealt with. Perhaps at a high cost.

 

We owe our military a huge debt for what they are doing for us and our children. We must support them and our leaders at times like these.

 

We have no choice. We either strike back, VERY HARD, or we will keep getting hit in the nose.

 

Lesson over, class dismissed.

MarkD Senior Enthusiast

MarkD

Posted
Posted
6. As soon as they do that, hit them again. Only this time hit them much harder. Squarely in the nose.

LMAO!  I agree 100%!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined

  • Who's Online   1 Member, 0 Anonymous, 418 Guests (See full list)

  • Latest Articles

  • Posts

    • newdude
      2 speed transfer case optional now?

      By newdude · Posted

      This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • newdude
      Different requirements for oil filters?

      By newdude · Posted

      2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Grumpy Bear
      Different requirements for oil filters?

      By Grumpy Bear · Posted

      Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
    • Coastie05
      give me some tips to make my truck look better

      By Coastie05 · Posted

      Go back to OEM wheels. 
    • newdude
      2020 Trailboss 6.2 replacement

      By newdude · Posted

      Probably not their first rodeo, so it should go as planned most likely.  Typically the service manager or tech doing the swap will put some seat time to shake it down after they get it all put back together.  We usually put 50-100mi before we hand them back so if something happens, its not after you get it.  A coolant leaks, oil leaks, a ground left off or loose, vibration, etc.     The new engines so far have been good?  There's been a couple that have popped out there again (the replacement engine) but most have been okay.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...