Jump to content

02 suburban wont start after engine swap


Recommended Posts

Posted

I swapped my engine in my 02 suburban and now when I turn the key I hear the fuel pump and it has spark and cranks but I'm getting no fuel. I disconnected the lines from the fuel rail and fuel leaks out but after I disconnect them and turn the key no fuel shoots out. I pressed in on the Schrader valve on the fuel rail and no air or fuel comes out.

 

 

Any ideas? I was just driving it right before I swapped the engine so I doubt the fuel pump went bad like that

Posted

Is there gas in the tank? Is the fuel filter clogged?

Posted

Is there gas in the tank? Is the fuel filter clogged?

Yea I walked 3 miles each way to the gas station and got 2 gallons lol

 

It could be clogged. A bit of dirt got in one of the lines on the fuel rail,might of gotten into the filter.

 

I was checking the gas line for kinks then realized it's all hard steel so that's not even possible.

 

Guess I need to walk to the parts store to get a fuel filter and tools to replace it.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...