Jump to content

Recommended Posts

Posted

As stated, truck sounds like it has an exhaust leak around 1500 RPM right before down shift, V8 mode. The radio has to be off to hear it, and now i'm tuned into it so I always hear it. Dealer said it was fuel pump, I'm not buying it having had many fords with leaking manifolds. Has anyone run across this issue/sound?

Posted (edited)

Flapper valve in the exhaust possibly? I don't notice any noise like that in my 15, but maybe I'm just not noticing it

Edited by GsBowtie
Posted (edited)

Good possibility. I was told that it was the fuel pump, and that they are quiet when you buy the truck but get louder.

 

So I guess the question is, does anyone have a loud "fuel pump"

Edited by derailed
Posted

Did the dealer attempt to fix it? I noticed a whistling noise when I have the windows down. It starts about 1800 rims in 2nd gear under acceleration. It gets higher pitch as rpms increase.

Posted

No they didn't... They gave me the old hand on the back let me show you to the door "it's all ok sir".. Who has time to argue with someone who doesn't know the difference between a nut and bolt.

 

Just haven't had the time for a second opinion. I looked myself and didn't see any carbon showing anywhere, but I'm highly skeptical of their diagnosis.

Posted

I assure you this truck didn't make that noise when I bought it. The dealer told me it gets louder after you put some miles on it.

  • 2 weeks later...
Posted

This sounds like my problem as well. If we are hearing the same noise, I can attest to how annoying it is. the dealer has replaced my fuel lines, fuel pump and still haven't fixed it. i said for day one it sounds like an exhaust leak but they are the experts.

 

See this tread and see if it sounds familiar.

 

http://www.gm-trucks.com/forums/topic/188701-engine-tick-2015-gmc-sierra-53/page-4?do=findComment&comment=1851252

  • Like 1
  • 4 years later...
Posted

I’m convinced it’s the ball and socket connection on the Y pipe to the header/manifold. The passenger side doesn’t have that connection and I do t hear anything from that side whatsoever. I’ve done Hooker Blackheart header on my 2018 5.3 and am about to cut/weld the Y pipe on driver side to make a connection exactly like the passenger side. 💯 it will fix the exhaust leak problem everyone is experiencing 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
    • when it's greyed out that is it's way of telling you that it's downloading the patch in the background. Eventually it will be fully downloaded and then it will prompt you at ignition shut down to run the update. I highly recommend doing the update once you get home and can run it a few times. I've had several issues with updates not going the first time around and I had to retry the update multiple times in my driveway before it was successful.   Some updates are huge and take awhile to download. You can help it by connecting to your home WiFi and keep the truck on service mode for the ignition and keep it alive for awhile on a battery charger too. There are specs it needs to be in for updating such as a full enough battery charge, no running ignition, etc.
    • I am not techy at all but wondered if you have the truck running but sitting still in park as some functions gray out as soon as the truck is moving. I believe in the settings for updates you can choose for it NOT to update and I wonder by chance if maybe that was chosen before and now it won't allow you to chose to press update, I think that is back in the settings menu where it has all the items one wants on or off etc. Also I assume you have a wifi connection and checked that it has some signal strength, not that it would have anything to do with the grayed out updates choice in that case. What I am thinking out loud of here may be be of no value but thought I would suggest it, sometimes it can be the simplest thing that resolves an issue.  
    • The so called rare failure that some certainly liked to tout ( die hard Ford fan boys ) as per the lifter failing and wiping out the cam. Back when it started happening the blame was being pointed to the lifters and honestly I never did hear anything myself conclusively one way or the other on that. Ford themselves in I believe 2024 had a technical bulletin I will call it that came out and for some engine platforms they were reprograming the engines idle speed but also they had a software update for the oil pump which then some time later was said what that software update did as to be increasing the oil pressure at idle. It is a good question if that issue was completely solved as one Ford specialist mechanic youtuber said he saw failures after that time period. Like anything there would be the variables, what oil is being used and the OCI and how much idle time gets put on an engine. I've seen some comments to claim that the L8T isn't so happy with high idle time either but I also know that companies that require their vehicle to idle a lot on the job don't tend to get the oil changed often enough for all those hours of idle time and go off of the odometer. 
    • My 2026 Silv. 1500 WT (reg cab/short bed/4wd) has the 40/20/40 with storage in lower middle seat as well as the fold-down center bolster/armrest.   With the dual glove boxes this is about as much storage as possible in a std cab IMHO. Bill
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...