Jump to content

2014 Silverado Door Locks Keep Cycling.

SLOW3R

By SLOW3R
in Troubleshooting & Recalls

Recommended Posts

SLOW3R Enthusiast

SLOW3R

Posted
Posted

Just started today, anytime I get in or out of my truck the driver door lock cycles a few times. I have tried both of my fobs, and put new batteries in earlier. No luck. Darn thing locked me out at security sign in at work coming back from lunch, thank goodness my window was cracked!!!

 

Anyone had this one happen to them? 

SLOW3R Enthusiast

SLOW3R

Posted
  • Author
Posted

Anyone? I disconnected the battery for awhile, with no luck. Its going to have to go to the dealer I guess, this is driving me absolutely nuts.

  • 1 year later...
mrbreeze New Member

mrbreeze

Posted
Posted

Did you ever get this fixed?  I have been having this issue for several months now.  I asked Chevy mechanic about it when I got my truck serviced a few weeks ago, and he just stared at me like I was crazy.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
53 minutes ago, mrbreeze said:

Did you ever get this fixed?  I have been having this issue for several months now.  I asked Chevy mechanic about it when I got my truck serviced a few weeks ago, and he just stared at me like I was crazy.

I saw online that an owner of a 2009 Silverado was having problems with the OnStar module, he disconnected and problem went away.

What year and model do you have, is your OnStar still active?

 

Welcome to the site!

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   3 Members, 1 Anonymous, 1,533 Guests (See full list)

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I ordered the Snap On...waiting for it to come in later this week or early next week.   New front cover, new crank seal and new balancer are on. Water pump, pulley, fan, hoses, and plastics reinstalled. I can move forward knowing all my timing marks are dead on and the front engine is hopefully sealed better than it was. Take 2 with the water pump...trying high temp thread sealer on the lower bolts.   Rebuilt injector and new-new regulator is in, it looks like new. Top intake reassembled and all the bits are reconnected and snugged down.   Thinking about knock sensors again, I located both of mine and, there's your problem, Francis... The driver's side one is broke, plastic is bashed in, part of the wire is bare, and it appears to have been damaged like that for a long time. I saw the wire but didn't think anything of it. The knock sensor might not be my pulled timing issue, but it sure looks suspect. It must still be conducting, otherwise I'd expect a CEL. But perhaps with its sacred crystal inside exposed, jilted and dirty, maybe it's sending mixed signals. So I'm waiting for one of those and a new pigtail to come in. Pass side sensor looks good, except for the spark plug wire resting on it (!). The plug wires are healthy so it shouldn't be causing an issue, but I separated them and added zip ties to nearby looms to keep everything well apart.   So, I'm down to installing a knock sensor AND, oh, replacing the exhaust and cat. I actually think that's going to be fairly easy, it's all bolt-together, all new stuff from Walker is laid out on the shop floor ready to go. Hopefully have this thing on the road again for the weekend.   My luck? It will still be leaking oil, coolant, pulled timing, intermittent CEL for running rich, or it probably won't run at all -- because that's how this project has gone.   I've never worked on a vehicle so ...hurt? ...cursed? in my life. Everything has been effed with SO HARD, but I think...knock on wood...I've managed to undo all the backyard stuff and we're almost reset back to "just" an 80k mile, 30 year old Blazer.
    • PunchT37
      Would this CV Shaft be bad?

      By PunchT37 · Posted

      Yes. You need to check out that thing, and the hub further.
    • anthony2558
      Would this CV Shaft be bad?

      By anthony2558 · Posted

      Would this be normal or a worn CV Shaft? 51K miles 3.5" lift? Boots are intact and no visible leaks showing. Attached is a the video I took. Thanks     https://youtu.be/ZnW7PPRmjJY?feature=shared    
    • Jsdirt
      2010 Avalanche 5.3 not running correctly after engine swap.

      By Jsdirt · Posted

      If everything checks out at the MAF, then the MAF is BAD, new or not.   You don't need a signal generator to troubleshoot this. PCM needs ALL powers and ALL grounds able to light a halogen headlight bulb - if it can light the bulb bright, then the wiring is good enough to run the PCM.   Best thing you can do for yourself is spend some time here: scannerdanner.com - Check out all his YouTube videos on similar issues. If you decide to subscribe it's the best bang-for-buck ratio in the automotive world, hands-down. He's got TONS of free vids on YouTube, too.
    • Tyler Gibbs
      PF63 Oil Filters Going Away?

      By Tyler Gibbs · Posted

      You got that Hengst D110??

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...