Aftermarket UCAs with stock wheel / zone 4.5 compatibility

[MBSierra17]

As the title suggests, is anyone aware of any aftermarket UCAs that are compatible with stock wheels and a zone 4.5" lift?

 

I have a 2017 sierra 4x4 CC with stamped UCAs making contact at the ball joint with tire wall. Looking at options between replacing wheels with less positive offset, or just replacing the control arms. I know there are several options out there, but I'm sure some would require the same offset adjustments. 

[Sierra706]

As the title suggests, is anyone aware of any aftermarket UCAs that are compatible with stock wheels and a zone 4.5" lift?
 
I have a 2017 sierra 4x4 CC with stamped UCAs making contact at the ball joint with tire wall. Looking at options between replacing wheels with less positive offset, or just replacing the control arms. I know there are several options out there, but I'm sure some would require the same offset adjustments. 

Spacers or new wheels


Sent from my iPhone using Tapatalk

[MBSierra17]

Update: it would seem the new knuckle is not making contact correctly with the steering stop on the lca, allowing the wheel to turn further than it should. Shop will be adding a new stop which should remedy the rubbing. Will update next week. 

[Aboogie808]

I went with Cognito UCA to correct my angles. I too have Zone lift.

[MBSierra17]

6 hours ago, Aboogie808 said:

I went with Cognito UCA to correct my angles. I too have Zone lift.

With stock wheels? 

[Aboogie808]

With stock wheels? 

I had stock, but changed them shortly after with 20x9 rims. Didn’t look right with a 7.75 lift.